9 June 2020 in IEEE Access
The motion control of robot manipulators is a crucial problem concerning automatically controlled robots. In this work, the model predictive control method with an integral compensation (MPC-I), which compensates for the matched uncertainties due to unmodeled dynamics, is proposed to solve the trajectory tracking problem of robot manipulators in joint and task spaces. First, this paper decouples the joint variables of the robot manipulator using a computed torque control method. The MPC-I method is, thereafter, derived to realize the motion control of the robot manipulators in joint space. To realize the motion control of the robot manipulator in task space, the task space is, thereafter, converted into the joint space, in which the MPC-I method is executed, afterward, to control the robot. Furthermore, an MPC-I variation, in which the inverse kinematics is calculated indirectly, is proposed to achieve the motion control in task space. The novelty of this paper is to propose the MPC-I method and the method of converting task space to joint space with indirect inverse kinematics calculation. The former is suitable for the dynamic control of the robot manipulators in the joint space, and the latter can extend the MPC-I method to dynamic control in task space. To evaluate the performance of the proposed control method, motion control simulations are performed in the task and joint spaces, respectively. Simulation results and comparisons verify the effectiveness of the proposed control approach for the dynamic control of the UR5 robot manipulator.
4 May 2020 in IEEE Access
In this paper, a third-order S-curve is used to model the motion issue. A closed method of solving is derived for the optimal point-to-point(P2P) time issue based on the model. Based on the P2P time-optimal solution, a closed multi-axis synchronization algorithm (MASA) method is proposed. This method considers the kinematic equation of the S-curve based on the inverse function of the multivariate function. Therefore, the inverse function of the execution time is derived via the kinematic equation of the P2P time optimization issue and solving a set of smaller bandwidth parameters is an important attempt in this paper. Otherwise, based on the MASA proposed in this paper, a synchronous computing framework suitable for the planning of robot space poses was designed. This framework can effectively solve problems with robot pose planning. The innovations of this article can be summarized as:(1)Based on the third-order S-curve, this paper deduced a complete method for solving the P2P time-optimal curve.(2) Based on the method for solving the time-optimal curve, this paper further derived three synchronization methods based on time constraints.(3) Based on the MASA proposed in this paper, a synchronous computing framework suitable for the planning of robot space poses was designed. The continuity and smoothness of the robot joint spatial motion can be guaranteed in the Descartes space. Few scholars have studied the closed solution method of multi-axis synchronization. The research in this paper promotes the theoretical research of motion control.