11 November 2022 in Energy Sources, Part A: Recovery, Utilization, and Environmental Effects
Viscosity reducer is used to reduce the high viscosity of drilling fluid containing bentonite as a continuous phase. However, the viscosity of drilling fluid increases and the rheology of the drilling fluid deteriorates at high temperature, causing problems such as reduction in rate of penetration and bit balling. As a core component, drilling fluids with bad rheology seriously affect the further development of drilling engineering, especially at high temperatures. Therefore, there is an urgent need for viscosity reducer suitable for high temperature. In this study, a high temperature-resistant viscosity reducer for water-based drilling fluid was prepared. The rheological parameters of drilling fluids containing 0, 0.5, 1, 1.5 wt% viscosity reducer after aging at different temperatures were evaluated. The results showed that the rheological parameters, such as apparent viscosity, yield point, plastic viscosity, and gel strength decreased within 200℃. Otherwise, filtration volume of 1.8 and 2.2 g/cm3 compound drilling fluids containing 1 wt% viscosity reducer was less than 10 ml. And its resistance to Na+ contamination reached saturation, that is, 36% NaCl solutions. The mechanism of viscosity reduction was also investigated by Fourier transform infrared and X-ray diffraction. Viscosity reducer adsorbed on the clay particles and destroyed the network structure formed by the clay particles while releasing free water.
24 October 2022 in RSC Advances
For wellbore stability in shale formations, the development of environmentally friendly and efficient shale inhibitors is urgently needed. Herein, we report the preparation of choline chloride-modified graphene (Ch-G). The inhibition and interaction mechanisms of choline chloride-modified graphene on montmorillonite were also investigated. We evaluated the inhibition of Ch-G via linear swelling and rolling recovery and selected the inorganic salt inhibitor KCl as the control group. The lowest swelling height of 2.10 mm and the highest rolling recovery of 78.87% were achieved, indicating the excellent inhibition performance of Ch-G. The mechanism of inhibition of Ch-G was determined by Fourier transform infrared spectroscopy, X-ray diffraction, X-ray photoelectron spectroscopy, transmission electron microscopy, scanning electron microscopy, and atomic force microscopy. The Ch-G formed hydrogen bonds, coordination, and electrostatic interactions with the surface of montmorillonite and entered the montmorillonite via intercalation to achieve the inhibition. The increase in the nitrogen atom content in Ch-G led to the production of more positive ions and the formation of more ion bands, which enhanced the ability to inhibit shale hydration. The addition of Ch-G produced larger montmorillonite sheets, demonstrating its effective inhibition ability, which is needed to enable drilling fluids to stably drill into shale formations.
11 January 2023 in RSC Advances
Structure of a hyperbranched polymer and graphene composite used as a shale inhibitor.