This article provides a new methodology for estimating fuel consumption and emissions by enabling a correct comparison between freight transportation modes. The approach is developed and integrated as a part of an intelligent transportation system dealing with goods movement. A key issue is related to energy consumption ratios and consequent CO2 emissions. Energy consumption ratios are often used based on transport demand. However, including other ratios based on transport supply can be useful. Furthermore, it is important to indicate which factors are associated with variations in energy consumption and emissions; especially of interest are parameters that have a higher incidence and order of magnitude, in order to fairly compare and understand the difference between transport modes and sub-modes. The study finds that the use of an energy consumption equation can improve the quality of the estimates. The study proposes that coefficients that define the energy consumption equation should be tested to determine market niches and sources of improvement in energy consumption according to the category of vehicles, fuel types used, and classes of products transported.
11 August 2014 in IEEE Transactions on Intelligent Transportation Systems
This paper presents a proposal to modify power supply systems currently used in ac-fed railways with neutral zones (NZs), in order to allow power-flow routing. The proposed system complements the existing infrastructure with additional power-electronic devices connected in parallel to both sides of the NZs, allowing control of power flow through adjacent electrical sections. The description and control of such a modified railway system is outlined in this paper. In addition, a mixed-integer programming optimization problem is formulated, which minimizes the investment and the operation costs, while ensuring the power supply to the train traffic. This optimization model is used to allow a systematic evaluation of the benefits of implementing such a railway smart grid system. Finally, a section of the high-speed line between Madrid and Barcelona is used as a case study, and the advantages of the proposed system are quantified in two different scenarios.
1 January 2012 in Procedia - Social and Behavioral Sciences
Increasing the speed at which a train can run on downward slopes through the effect of the force of gravity and the inertia of the train could involve: a reduction in travel time whilst also reducing energy consumed (due to reduced use of the brake). This increase in speed on downward slopes also offers the possibility of reducing the power of trains and/or reducing the maximum speed. Both alternatives can help to maintain the necessary travel time on the route, and the lost time on upward slopes and level track sections will be offset by the time gained on the downward slopes, which will in turn mean reduced train costs and a further reduction in energy consumption
The Spanish railway network has two different track gauges, two electrification systems, and four families of signaling systems--and the rolling stock includes hybrid trains. The new, extended package presented here finds the timings and best route for any piece of rolling stock and computes its consumption, emissions, and exploitation costs.
The Spanish railway network managed by the Adif company has two different track gauges, two electrification systems, and four families of signaling systems. The simulation package presented here takes these variations into account, making it easier to decide about routes, rolling-stock selection, and future infrastructure or vehicle investments.
1 December 2014 in Procedia - Social and Behavioral Sciences