Stylianos P. Savaidis

Stylianos P. Savaidis

Auto-generated profile, based on publicly available information

Stylianos P. Savaidis

Department of Electrical and Electronics Engineering, University of West Attica, Aigaleo, Greece

Research Focus & Metrics

Academic Career Length

20Years (2007-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
18 March 2020 in IEEE Transactions on Microwave Theory and Techniques
Verified
Journal Article
Closed access
SSStylianos P. Savaidis
Stylianos P. Savaidis
SMStylianos A. Mytilinaios
Stylianos A. Mytilinaios
ZIZisis C. Ioannidis
Zisis C. Ioannidis
NSNikolaos A Stathopoulos
Nikolaos A Stathopoulos
A microwave pulse compressor (MPC) system formed by an inductive iris, a straight rectangular waveguide, and an H-plane T-junction is experimentally studied. The MPC design, which is based on an equivalent circuit simulation model, ensures the optimum cavity-storage gain at 1.3 GHz. A low-pressure gas discharge tube (GDT) that is placed at the side arm of the T-junction implements the switching trigger for the cavity energy extraction. The experimental results show that high pulse repetition frequency (PRF) operation together with optimal cavity-extraction gain is feasible by carefully selecting the GDT gas type, pressure level, and flow rate. Under optimal conditions, the MPC system approaches the theoretically predicted cavity-extraction gain of 19 dB and a PRF up to 300 Hz.

2 June 2020 in IEEE Transactions on Microwave Theory and Techniques
Verified
Journal Article
Closed access
ZIZ. C. Ioannidis
Z. C. Ioannidis
SSS. P. Savaidis
S. P. Savaidis
SMStylianos A. Mytilinaios
Stylianos A. Mytilinaios
SLS. Livieratos
S. Livieratos
NSNikolaos A Stathopoulos
Nikolaos A Stathopoulos
A microwave pulse compressor (MPC) consisting of an iris, a straight waveguide section, and a T-junction can be used in order to convert a long pulse with lower power to a shorter pulse with a higher power. A significant compression gain can be achieved, provided that the system is designed precisely. The duration of the compressed pulse is proportional to the cavity length, thus imposing a constraint on the development of mobile systems. In this work, we present the circuit/transmission-line-based design methodology that we follow in order to fold the cavity (while retaining the same electrical length) by using T-junction turns. For example, we design a 1.3-GHz folded compressor and compare its performance to the corresponding one of a straight-cavity compressor. The 3-D full-wave simulations with CST Studio Suite and experimental measurements with the developed compressor confirm the accuracy of the proposed design methodology.

20 February 2015 in Applied Optics
Verified
Journal Article
Closed access
PDF file
NSN. A. Stathopoulos
N. A. Stathopoulos
SSS. P. Savaidis
S. P. Savaidis
ABA. Botsialas
A. Botsialas
ZIZ. C. Ioannidis
Z. C. Ioannidis
DGD. G. Georgiadou
D. G. Georgiadou
GPG. Pagiatakis
G. Pagiatakis
A generalized transmission line method (TLM) that provides reflection and transmission calculations for a multilayer dielectric structure with coherent, partial coherent, and incoherent layers is presented. The method is deployed on two different application fields. The first application of the method concerns the thickness measurement of the individual layers of an organic light-emitting diode. By using a fitting approach between experimental spectral reflectance measurements and the corresponding TLM calculations, it is shown that the thickness of the films can be estimated. The second application of the TLM concerns the calculation of the external quantum efficiency of an organic photovoltaic with partially coherent rough interfaces between the layers. Numerical results regarding the short circuit photocurrent for different layer thicknesses and rough interfaces are provided and the performance impact of the rough interface is discussed in detail.

4 January 2019 in Applied Optics
Verified
Journal Article
Open access
PDF file
NSNikolaos A Stathopoulos
Nikolaos A Stathopoulos
SSS. P. Savaidis
S. P. Savaidis
HSH. Simos
H. Simos
EREvangelos Rigas
Evangelos Rigas
RCRicardo Correia
Ricardo Correia
RTRalph P Tatam
Ralph P Tatam
A new method for the analysis and design of fiber Bragg gratings (FBGs) based on the theory of transmission lines has been developed and verified both theoretically and experimentally. The method is an extension of the coupled-mode theory and utilizes the equivalent transmission lines in order to simulate any type of grating, with an easy and direct implementation. The method provides the ability to analyze the optical devices without using full wave approaches, while also facilitating the incorporation of core materials with a complex or non-linear refractive index, non-uniform distributions of the grating’s refractive index, and tilted and phase-shifted gratings. The approach also allows the design of the grating for a given reflection spectra. Numerical results of the method’s application on a randomly varied inscription of the refractive index of a FBG have also been simulated and discussed. Using this method, the characteristics of an erbium-doped (ED)-FBG have been simulated and the predictions verified experimentally.

10 September 2024 in IEEE Transactions on Plasma Science
Verified
Journal Article
Closed access
VTVasilios A. Tantanis
Vasilios A. Tantanis
SSStylianos P. Savaidis
Stylianos P. Savaidis
ZIZisis C. Ioannidis
Zisis C. Ioannidis
DKDimitra I. Kaklamani
Dimitra I. Kaklamani
NUNikolaos K. Uzunoglu
Nikolaos K. Uzunoglu
A gas discharge tube (GDT) switch operating in a MW-class microwave pulse compression (MPC) system is experimentally studied. The examined GDT operates at low-pressure conditions with constant gas intake. The experimental campaign aims to evaluate the influence of the GDT design and operational parameters on the MPC performance. The evaluated design parameters concern the GDT size and the gas flow direction, whereas the operational parameters the GDT gas pressure and flow rate at different MPC drive power and pulse repetition frequency (PRF) conditions. Experimental results show that under optimal selection of the design parameter values and a dynamic adjustment of the operational parameters, an optimal MPC performance is achieved. Under such optimal setup, the MPC system driven by 10 kW source achieves a MW-class output power level performance up to a PRF of 500 Hz.

1 September 2014
Verified
Conference Paper
Closed access
ZIZ. C. Ioannidis
Z. C. Ioannidis
SSS. P. Savaidis
S. P. Savaidis
SMStylianos A. Mytilinaios
Stylianos A. Mytilinaios
CTC. Tsitouri
C. Tsitouri
NSNikolaos A Stathopoulos
Nikolaos A Stathopoulos
Microwave pulse compression systems using a waveguide cavity composed by an inductive iris and an H-plane T-junction with the primary arm shorted is studied using the individual components' equivalent circuits. The equivalent circuit model of the device is studied in detail and optimized design characteristics and performance figures such as the length of the waveguide cavity, the iris width, the length of the shorted arm as well as the cavity gain and leakage are calculated using closed form expressions. Based on the aforementioned analysis, an optimized design procedure is proposed. As a verification of the proposed method, a microwave pulse compressor working at 1.3 GHz is studied and then compared with the results of a full-wave three dimensional commercial electromagnetic code.