The low thermal conductivity of polymers is a barrier to their use in applications requiring high thermal conductivity such as electronic packaging, heat exchangers, and thermal management devices. Polyolefins represent about 55 percent of global thermoplastic production, and therefore improving their thermal conductivity is essential for many applications. This review analyzes the advances in enhancing the thermal conductivity of polyolefin composites. First, the mechanisms of thermal transport in polyolefin composites and the key parameters that govern conductive heat transfer through the interface between the matrix and the filler are discussed. Then the advantage and limitations of the current methods for measuring thermal conductivity are analyzed. Moreover, the progress in predicting the thermal conductivity of polymer composites using modeling and simulation is discussed. Furthermore, polyolefin composites and nanocomposites with different thermally conductive fillers are reviewed and analyzed. Finally, the key challenges and future directions for developing thermally enhanced polyolefin composites are outlined.
11 August 2021 in International Journal of Energy Research
We report enhanced thermal conductivity of of low-density polyethylene (LDPE) with granulated graphene. The morphological analysis of the nanocomposite releveled granulated graphene is dispersed in LDPE and randomly oriented. The melt processing has reduced the filler's lateral size. At 40 wt. % loading of granulated graphene, the nanocomposite thermal conductivioty (κc) reached 2.91 W/m.K, corresponding to ~1000% increase overLDPE. This very high enhancement is attributed to the reduction in the polymer/filler's thermal interfacial resistance due to the graphene sheets' broad size distribution. The experimentally measured κc was compared theoretically predicted. The theoretical model provided reasonable prediction of κc versus the filler loading. Furthermore, hybrid fillers on binary and ternary combinations of graphene, graphene nanoplatelets, and micrographite with granulated graphene were also prepared. The hybrid fillers revealed that fillers with similar shape and different aspect ratios did not display any synergetic κc.