This paper presents new alternatives of design and control for three-phase grid connected photovoltaic systems GCPS. In this work, the photovoltaic generation source PVG is connected to the main electric grid via two power electronics stages. The first stage consists on a buck-boost dc-dc converter that insures impedance adaptation between the PVG and the grid. This converter is controlled by the sliding mode control SMC to track the dc reference voltage required by the main grid. The second stage is composed by a dc-bus and a three-phase voltage inverter used to interface the PVG with the grid utility. The inverter is controlled by the Direct Power Control DPC in order to inject the PV power into the main grid with a high quality power factor. The model of the GCPS has been implemented in the Matlab/Simulink software and simulation studies have been presented to demonstrate the effectiveness of the proposed study.
Energy resources and food security are the most important issues for many countries around the world. Climatic conditions affect the agriculture production which is the backbone of the food security for all countries. Protected agriculture presents an effective solution to face this challenge. This paper aims to develop a high tech greenhouse with effective climatic control for greater yield. A fuzzy controller is used to manage the inside temperature and humidity of the greenhouse. Furthermore, based on the high level of solar radiation during summer and the high demand of power, the photovoltaic energy could be investigated to avoid burdening the utility grid by feeding different accessories of the greenhouse. This application is in accordance with the sustainable development and the environment protection where the classical energy resources are substituted with green energy form.
This paper present a photovoltaic energy application which consist on supplying electricity power to a greenhouse cooling system. It aims to reduce the agriculture production cost and to be an alternative of the absence of electricity specially in arid zone. The photovoltaic generator PVG is controlled via Maximum Power Point Tracking MPPT and the cooling system, modeled as an induction machine, is controlled via a direct torque control DTC mode. The greenhouse is a thermodynamic complex system where a multiple of factors interaction affect the interior climate evolution which make the prediction of the internal climate status more difficult. A dynamic model of the greenhouse was developed to simulate the thermodynamic response for external meteorological conditions. In this paper we will focus on the control of the internal temperature of the greenhouse. When the inside temperature exceed the set point, the fans are activated to refresh the inside air.