1 January 2020 in Combustion and Flame
25 June 2015 in Journal of Fluid Mechanics
Many thermoacoustic systems exhibit rich nonlinear behaviour. Recent studies show that this nonlinear dynamics can be well captured by low-order time domain models that couple a level set kinematic model for a laminar flame, the $G$ -equation, with a state-space realization of the linearized acoustic equations. However, so far the $G$ -equation has been coupled only with straight ducts with uniform mean acoustic properties, which is a simplistic configuration. In this study, we incorporate a wave-based model of the acoustic network, containing area and temperature variations and frequency-dependent boundary conditions. We cast the linear acoustics into state-space form using a different approach from that in the existing literature. We then use this state-space form to investigate the stability of the thermoacoustic system, both in the frequency and time domains, using the flame position as a control parameter. We observe frequency-locked, quasiperiodic and chaotic oscillations. We identify the location of Neimark–Sacker bifurcations with Floquet theory. We also find the Ruelle–Takens–Newhouse route to chaos with nonlinear time series analysis techniques. We highlight important differences between the nonlinear response predicted by the frequency domain and the time domain methods. This reveals deficiencies with the frequency domain technique, which is commonly used in academic and industrial studies of thermoacoustic systems. We then demonstrate a more accurate approach based on continuation analysis applied to time domain techniques.
1 September 2016 in Combustion and Flame
7 December 2018 in Journal of Engineering for Gas Turbines and Power
Gas-turbine combustion chambers typically consist of nominally identical sectors arranged in a rotationally symmetric pattern. However, in practice, the geometry is not perfectly symmetric. This may be due to design decisions, such as placing dampers in an azimuthally nonuniform fashion, or to uncertainties in the design parameters, which break the rotational symmetry of the combustion chamber. The question is whether these deviations from symmetry have impact on the thermoacoustic-stability calculation. The paper addresses this question by proposing a fast adjoint-based perturbation method. This method can be integrated into numerical frameworks that are industrial standard such as lumped-network models, Helmholtz and linearized Euler equations. The thermoacoustic stability of asymmetric combustion chambers is investigated by perturbing rotationally symmetric combustor models. The approach proposed in this paper is applied to a realistic three-dimensional combustion chamber model with an experimentally measured flame transfer function (FTF). The model equations are solved with a Helmholtz solver. Results for modes of zeroth, first, and second azimuthal order are presented and compared to exact solutions of the problem. A focus of the discussion is set on the loss of mode-degeneracy due to symmetry breaking and the capability of the perturbation theory to accurately predict it. In particular, an “inclination rule” that explains the behavior of degenerate eigenvalues at first order is proven.
19 September 2018 in Journal of Engineering for Gas Turbines and Power
In this theoretical and numerical analysis, a low-order network model is used to investigate a thermoacoustic system with discrete rotational symmetry. Its geometry resembles that of the MICCA combustor (Laboratoire EM2C, CentraleSupelec); the flame describing function (FDF) employed in the analysis is that of a single-burner configuration and is taken from experimental data reported in the literature. We show how most of the dynamical features observed in the MICCA experiment, including the so-called slanted mode, can be predicted within this framework, when the interaction between a longitudinal and an azimuthal thermoacoustic mode is considered. We show how these solutions relate to the symmetries contained in the equations that model the system. We also discuss how considering situations in which two modes are linearly unstable compromises the applicability of stability criteria available in the literature.
22 September 2016 in Journal of Fluid Mechanics
In this study we present a theoretical weakly nonlinear framework for the prediction of thermoacoustic oscillations close to Hopf bifurcations. We demonstrate the method for a thermoacoustic network that describes the dynamics of an electrically heated Rijke tube. We solve the weakly nonlinear equations order by order, discuss their contribution on the overall dynamics and show how solvability conditions at odd orders give rise to Stuart–Landau equations. These equations, combined together, describe the nonlinear dynamical evolution of the oscillations’ amplitude and their frequency. Because we retain the contribution of several acoustic modes in the thermoacoustic system, the use of adjoint methods is required to derive the Landau coefficients. The analysis is performed up to fifth order and compared with time domain simulations, showing good agreement. The theoretical framework presented here can be used to reduce the cost of investigating oscillations and subcritical phenomena close to Hopf bifurcations in numerical simulations and experiments and can be readily extended to consider, e.g. the weakly nonlinear interaction of two unstable thermoacoustic modes.