To address the issue of the vibration characteristic signals of floodgates being affected by background white noise and low-frequency water flow noise, a noise reduction method combining the improved adaptive singular value decomposition algorithm (ASVD) and the improved complete ensemble EMD with adaptive noise (ICEEMDAN) is proposed. Firstly, a Hankel matrix is constructed based on the collected discrete time signals. After performing SVD on the Hankel matrix, the ASVD algorithm is used to automatically select the effective singular values to filter out most of the background white noise and retain the useful frequency components with similar energy in the signal. Then, ICEEMDAN combined with the Spearman correlation coefficient method is used to further filter out residual white noise and low-frequency water flows. The noise reduction performance of this combined method is verified through simulation experiments. Filtered by the ASVD-ICEEMDAN method, the signal-to-noise ratio of the simulation signal (50% noise level) is increased from 4.417 to 16.237, and the root mean square error is reduced from 2.286 to 0.586. Based on the practically measured vibration signals of a floodgate at a large hydropower station, the result shows that the ASVD-ICEEMDAN method exhibits good noise reduction performance and feature information extraction abilities for floodgate vibration signals, and can provide support for operational mode analysis and damage identification of practical structures under complex interference conditions.
14 January 2025 in Journal of Civil Structural Health Monitoring
Based on the Tersoff potential, molecular dynamics simulations have been performed to investigate the kinetic coefficients and growth velocities of Si (100), (110), (111), and (112) planes. The sequences of the kinetic coefficients and growth velocities are μ(100) > μ(110) > μ(112) > μ(111) and v(100) > v(110) > v(112) > v(111), respectively, which are not consistent with the sequences of the interface energies, interplanar spacings, and melting points of the four planes. However, they agree well with the sequences of the distributions and diffusion coefficients of the melting atoms near the solid–liquid interfaces. It indicates that the atomic distributions and diffusion coefficients affected by the crystal orientations determine the anisotropic growth of silicon. The formation of stacking fault structure will further decrease the growth velocity of the Si (111) plane.