29 October 2014 in Optica
Increasing our understanding of regional greenhouse gas transport, sources, and sinks requires accurate, precise, continuous measurements of small gas enhancements over long ranges. We demonstrate a coherent dual frequency-comb spectroscopy technique capable of achieving these goals. Spectra are acquired spanning 5990 to (1600–1670 nm) covering absorption features from , , , HDO, and , across a 2 km path. The spectra have sub-1-kHz frequency accuracy, no instrument lineshape, and a point spacing. They are fit with different absorption models to yield dry-air mole fractions of greenhouse gases. These results are compared with a point sensor under well-mixed conditions to evaluate the accuracy of models critical to global satellite-based trace gas monitoring. Under heterogeneous conditions, time-resolved data demonstrate tracking of small variations in mole fractions, with a precision for and for in 5 min. Portable systems could enable regional monitoring.
19 March 2018 in Nature Photonics
28 April 2013 in Nature Photonics
28 December 2011 in Physical Review A
We demonstrate a high-accuracy dual-comb spectrometer centered at 3.4 m. The amplitude and phase spectra of the , , and partial branches of the methane band are measured at 25 to 100 MHz point spacing with resolution under 10 kHz and a signal-to-noise ratio of up to 3500. A fit of the absorbance and phase spectra yields the center frequency of 132 rovibrational lines. The systematic uncertainty is estimated to be 300 kHz, which is of the Doppler width and a 10-fold improvement over Fourier transform spectroscopy. These data quantify the accuracy and resolution achievable with direct comb spectroscopy in the midinfrared.
14 July 2009 in IEEE Journal of Quantum Electronics
This paper gives an overview on the design, fabrication, and characterization of quantum cascade detectors. They are tailorable infrared photodetectors based on intersubband transitions in semiconductor quantum wells that do not require an external bias voltage due to their asymmetric conduction band profile. They thus profit from favorable noise behavior, reduced thermal load, and simpler readout circuits. This was demonstrated at wavelengths from the near infrared at 2 mum to THz radiation at 87 mum using different semiconductor material systems.