14 September 2022 in Proceedings of the Royal Society A: Mathematical, Physical and Engineering Sciences
In a passive lossy acoustical system, sum rules derived from passivity explicitly relate the broadband response to the spatial dimension of the system, which provide important design criteria as well. In this work, the theory of Herglotz function is applied systematically to derive sum rules for unidimensional scattering problems relying on passive acoustic treatments which are generally made of rigid, motionless and subwavelength structures saturated by air. The rigid-boundary reflection, soft-boundary reflection and transmission problems are analysed. The derived sum rules are applied for guiding the designs of passive absorbers and mufflers: the required minimum space is directly predicted from the target (i.e. the desired absorption or transmission-loss spectra) without any specific design. Besides, it is possible to break this type of sum rules and fundamental constraints in particular cases. This property, if well used, could result in ultra-compact absorbers working at long wavelength up to infinity.
12 April 2023 in Advanced Materials Technologies
Passive metamaterials provide efficient solutions for sound absorption in the low‐frequency regime with deep subwavelength dimensions. They have been extensively applied in unidimensional reciprocal problems considering that an incident wave is either reflected or transmitted at the outlet boundary. However, the generalized problem with impedance boundary condition is not well understood yet. This work presents a general design methodology of metamaterial absorbers for open‐duct problems, which is a special case of impedance outlet boundary encountered in broad practical applications, for example, noise‐attenuation problems in heat ventilation and air conditioning systems. By properly using monopolar point scatterers made of arrays of Helmholtz resonators, the design process is significantly simplified; the transfer matrix modeling is sufficiently accurate to describe the acoustic response of the system. A single monopolar point scatterer is insufficient to attenuate both the reflected and radiated waves; a frequency‐dependent maximum absorption exists and is derived analytically. To go beyond this absorption bound and achieve perfect absorption, at least two point scatterers are necessary. Specific designs are provided and validated experimentally for maximum or perfect absorption, either at single frequencies or over specific frequency bands.
11 February 2025 in Advanced Materials Technologies
Recent advances in acoustic metamaterials have overcome narrow‐band limitations, allowing for optimal tuning of key functions such as sound absorption and diffusion. However, most existing designs focus on single functions, leaving a gap in multi‐functional solutions that can address complex acoustic requirements. To fill this gap, a Dual‐Function Passive Acoustic Metamaterial (DFPAM) is proposed that effectively balances absorption and diffusion within the same structure by leveraging principles of causality and passivity. The DFPAM achieves high broadband sound absorption (〈α〉 ≈ 0.85) and diffusion (〈δ〉 ≈ 0.8), covering more than one octave in each configuration. With a compact thickness of only 12 cm, nearly half that of traditional treatments, this design uses just a fraction of the available space (1/3 for absorption, 2/3 for diffusion) while maximizing performance. This novel approach not only optimizes sound control but also provides a highly space‐efficient solution. The DFPAM offers transformative possibilities for room acoustics and can be adapted to diverse environments, including building and aerospace applications, where multi‐functional acoustic solutions are in increasing demand.
22 February 2024 in Journal of Sound and Vibration
8 September 2025 in Applied Acoustics
19 December 2024 in Physical Review Applied