28 January 2020 in Scientific Reports
With the proliferation of Li-ion batteries in smart phones, safety is the main concern and an on-line detection of battery faults is much wanting. Internal short circuit is a very critical issue that is often ascribed to be a cause of many accidents involving Li-ion batteries. A novel method that can detect the Internal short circuit in real time based on an advanced machine leaning approach, is proposed. Based on an equivalent electric circuit model, a set of features encompassing the physics of Li-ion cell with short circuit fault are identified and extracted from each charge-discharge cycle. The training feature set is generated with and without an external short-circuit resistance across the battery terminals. To emulate a real user scenario, internal short is induced by mechanical abuse. The testing feature set is generated from the battery charge-discharge data before and after the abuse. A random forest classifier is trained with the training feature set. The fault detection accuracy for the testing dataset is found to be more than 97%. The proposed algorithm does not interfere with the normal usage of the device, and the trained model can be implemented in any device for online fault detection.
19 April 2010 in IEEE Electron Device Letters
Using an atomistic full-band quantum transport solver, we investigate the performances of vertical band-to-band tunneling FETs (TFETs) whose operation is based on the enhancement of the gate-induced drain leakage mechanism of MOSFETs, and we compare them to lateral p-i-n devices. Although the vertical TFETs offer larger tunneling areas and therefore larger on currents than their lateral counterparts, they suffer from lateral source-to-drain tunneling leakage away from the gate contact. We propose a design improvement to reduce the off current of the vertical TFETs, maintain large on currents, and provide steep subthreshold slopes.
12 June 2020 in Scientific Reports
Accurate state of health (SOH) estimation of rechargeable batteries is important for the safe and reliable operation of electric vehicles (EVs), smart phones, and other battery operated systems. We propose a novel method for accurate SOH estimation which does not necessarily need full charging data. Using only partial charging data during normal usage, 10 derived voltage values ( $${v}_{sei}$$ ) are collected. The initial $${v}_{sei}$$ point is fixed and then for every 1.5% increase in the Coulomb counting, other points are selected. The difference between the $${v}_{sei}$$ values ( $$\Delta {v}_{sei}$$ ) and the average temperature during the charging form the feature vector at different SOH levels. The training data set is prepared by extrapolating the charging voltage curves for the complete SOH range using initial 400 cycles of data. The trained artificial neural network (ANN) based on the feature vector and SOH values can be used in any battery management system (BMS) with a time complexity of only $$O({n}^{4})$$ . Less than 1% mean absolute error (MAE) for the test cases has been achieved. The proposed method has a moderate training data requirement and does not need any knowledge of previous SOH, state of charge (SOC) vs. OCV relationship, and absolute SOC value.
6 January 2015 in IEEE Transactions on Electron Devices
In this brief, the random dopant fluctuation (RDF)-induced threshold voltage (VT) variability, ON current (ION) variability, and VT mismatch in undoped channel Si gate-all-around (GAA) n-nanowire MOSFETs (n-NWFETs) are studied using coupled 3-D statistical device simulations considering quantum corrected room temperature drift-diffusion transport. The RDFs are introduced in the Si NWFET tetrahedral device grid by a 3-D atomistic MonteCarlo technique. The RDF due to discrete random dopants located in the source (S)/drain (D) extension and channel regions of Si GAA n-NWFET are found to impact the device characteristic variability. The numerical VT mismatch analysis and comparison with the Si n-NWFET total AVT measurement data from the literature reveal that RDF still plays a significant source for device random fluctuations in undoped channel Si GAA n-NWFETs. The numerical VT mismatch study indicates the fact that complete suppression of RDF induced device random variability in undoped channel fully depleted MOS devices is still going to be a challenge, as long as doped S/D regions are employed.
11 September 2014 in IEEE Transactions on Electron Devices
The metal-gate granularity-induced threshold voltage (VT) variability and VT mismatch in Si gate-all-around (GAA) nanowire n-MOSFETs (n-NWFETs) are studied using coupled 3-D statistical device simulations considering quantum corrected room temperature drift-diffusion transport. The impact of metal-gate crystal grain size on linear and saturation mode VT variability are analyzed. The VT mismatch study predicts lower mismatch figure of merit (AVT) in TiN-gated Si GAA n-NWFETs compared with the reported experimental mismatch data for TiN-gated Si FinFETs.
23 July 2013 in IEEE Transactions on Electron Devices
A novel method to model the effect of local workfunction variation in high-k metal gate nanoscale transistors is proposed. Impact of variability in metal grain granularity on device performance is studied using ab initio density functional theory calculations and device simulations, which show that different metal grain orientations (GOs) can result in large (≥100 mV) variation in metal gate effective work function. Probabilities of occurrence of each GO and the grain size are used to estimate the work-function variations. Full 3-D device simulations are performed to study the effect of metal grain granularity on FinFET and planar MOSFET behavior. Simulated mismatch trends are shown to be in good agreement with the grain diameters and device geometries.