4 March 2020 in IEEE Transactions on Energy Conversion
This paper proposes a novel Bi-Magnet machine design concept in which ferrite and rare earth magnet materials are both utilized for torque production. The proposed design aims to reduce the cost of permanent magnet machines by minimizing the use of expensive high-grade rare earth magnet materials without compromising the high performance associated with them. The decreased performance due to the reduced rare earth magnet content can be compensated by adding inexpensive ferrite magnets. The design was optimized to achieve maximum cost-savings by minimizing the rare earth magnet content and improving the saliency of the rotor structure. A comparative study was conducted to highlight the advantages of the proposed concept using the Camry 2007 model as the baseline design. The results show that the proposed design is capable of achieving the same torque and power density as the baseline design using 30% less rare earth magnet materials, resulting in 20% active material cost reduction. The Bi-Magnet machine concept is shown to maintain the superior performance of conventional rare earth permanent magnet machines at a lower cost.
29 January 2019 in IEEE Transactions on Industry Applications
This paper proposes a novel shaped-magnet surface permanent magnet machine design concept featuring magnets shaped according to a sinusoid plus a third harmonic along the axial direction, and full-pole-pitched distributed stator windings with a unity winding factor to provide high torque density with essentially zero torque ripple for high performance motor applications. The magnet thickness is uniform along the radial direction so as not to impair the magnet's ability to handle demagnetization force. The proposed design was compared against a full-pole-pitched magnet design with maximum magnetic loading and a conventional bread-loaf magnet design. The results demonstrate that the proposed shaped-magnet design uses the magnet materials efficiently to achieve torque density comparable to that of the full-pole-pitched magnet design, and essentially zero torque ripple without compromising its resistivity against a demagnetization force, which conventional bread-loaf magnets cannot offer.
23 February 2017 in IEEE Transactions on Industry Applications
This paper proposes a low speed dual stator spoke type vernier permanent magnet motor (DSSVPMM) using ferrite permanent magnets (PMs). The machine is designed and verified by finite element (FE) analysis. The final design is compared against a commercial industrial interior permanent magnet machine (IPMM) using rare earth PMs and a single air gap vernier spoke type PM machine. The final design demonstrates higher torque density, lower torque ripple, and higher efficiency than those of the IPMM and the single air gap vernier spoke type PM machine. A PM demagnetization analysis is provided for different fault currents and temperatures. The analysis concludes that the ferrite PMs are able to withstand the fault current without evidence of severe irreversible demagnetization. The proposed design also shows balanced net radial force.
29 July 2019 in IEEE Transactions on Energy Conversion
This paper develops an improved dual-stator Vernier machine using ferrite magnet materials, aiming to replace an industrial interior permanent magnet machine with rare earth magnets in a low speed industrial application. The improved Vernier design adapts the single winding dual-stator topology with an empty inner stator core mainly to improve the torque density and eliminate the heat from the inner stator windings of conventional dual-stator Vernier machines. A drum rotor is also proposed to provide mechanical and structural enhancements. The paper compares the performance of the improved Vernier design against an industrial interior permanent magnet machine with rare earth magnets. The comparison shows that the improved design using ferrite magnets has even higher torque density and efficiency than those exhibited in the industrial interior permanent magnet machine with rare earth magnets. The improved Vernier machine design has considerable potential to replace industrial rare earth interior permanent magnet machines in low speed applications.
8 October 2019 in IEEE Transactions on Industry Applications
This paper compares various design techniques for torque ripple reduction using a commercial industrial interior permanent magnet machine (IPMM). These design techniques include the traditional skewing, radial pole shaping, and the proposed axial pole shaping. The new axial pole shaping technique achieves a particular flux concentration pattern on the rotor surface along the axial direction through shaping the pole arc radially and axially. The flux concentration pattern was optimized using the differential evolution (DE) algorithm. All three design techniques are implemented individually in the same commercial IPMM design. The performance of all the techniques was simulated using finite element (FE) method. The comparative study shows that the proposed axial pole shaping can reduce the torque ripple effectively with minimum torque reduction compared to the other two traditional techniques. The predicted results were validated experimentally through a variety of tests in which the measurements show reasonably good agreement with the predicted performance.
29 May 2020 in IEEE Transactions on Industry Applications
This two-part paper compares the torque performance of 12 types of AC machines based on the same current density level, flux density and rotor dimensions. Part II examines the torque capability of machines more recently developed which utilize the wave shaping capability of a solid- state frequency inverter. Essen's Equation, as utilized in Part II is modified to accommodate machines requiring non-sinusoidal waveforms. The “tau” factor, introduced in Part I is also modified and is again used as means for comparison of any AC machine with an “ideal” machine based now upon a modified form of Essen's Equation.