It is well known that chitosan composites are good candidates for novel orthopedic applications. Herein, a comprehensive in vitro comparison between neat and carbon nanotube (CNT) containing chitosan scaffolds will be reported for the first time. Functionalized multiwalled carbon nanotubes (f-MWCNTs) prepared by the acid treatment of CNTs were used as reinforcement agents. In this study, a group of chitosan scaffolds was manufactured reinforced by different amounts of the f-MWCNTs. Analysis of the FTIR spectra of the scaffolds confirmed the presence and functionalization of MWCNTs in polymer matrices. A high degree of crystallinity in the engineered scaffolds was noted in XRD patterns. Further, XRD results were used to study the structural properties. In order to survey the morphology of the chitosan/MWCNT scaffold, a FESEM micrograph was taken. The values of porosity ranged between 93.6 and 94.5%. The mechanical characteristics of the chitosan scaffolds were boosted by introducing f-MWCNTs. As expected, pore size on crystallinity index (CrI) of the scaffolds were decreased after introducing the f-MWCNTs. PBS was used to investigate the water uptake and water stability of the products. MTT assay results of the scaffolds’ cell viability shows the non-toxicity and satisfactory biocompatibility of the CNT enriched scaffolds. The electrical conductivity test showed stepwise increases in electrical conductivity with the increase in CNT content. This work demonstrates that f-MWCNTs can improve the capabilities of the chitosan scaffolds in low concentrations without endangering cell proliferation on the scaffolds.
This paper describes the mechanical behavior of flexible polymer nanocomposite films loaded with MWCNT/Fe3O4 nanopowders as filler. A simple and expedite casting evaporation methodology was used for manufacturing the PVA-based films with a portion of HPC and PVDF polymers. The average crystallite size of superparamagnetic magnetite nanoparticles (NPs) deposited onto the functionalized carbon nanotubes (f-MWCNTs) was located between ca. 9.6–11.9 nm, while the analysis of VSM data came up with results showing an awful lot of magnetic strength for these treated nanopowders. A non-covalent functionalization procedure on the resultant colloidal MWCNT/Fe3O4 nanopowders was carried out by introducing hydrophilic PVA chains around the tubes. Importantly, the hypothesis behind our work was that the tight PVDF polymer could effectively enhance the tensile strength of soft PVA polymer film, whereas high-stretchable HPC polymer could be used to increase the elongation at break of PVA-based films. Advantageously, this idea therefore gave rise to interesting mechanical indices of PVA-based polymer films, and even as a significant observation it was found that the magnetic interactions between magnetite NPs could further amplify the mechanical stability of the specimens. We emphasize that the resultant MWCNT/Fe3O4-contained multi-polymer films are thus capable of being exploited in industrial and medical gadgets such as mechanical sensors, biohybrid swimmers, artificial hearts, mechanical respiration devices, and the like.