7 July 2021 in IEEE Robotics and Automation Letters
Sailboats have a wide range of applications on account of their energy-saving, environmentally benign and low-noise characteristics. This has led to the increasing popularity of research in autonomous sailing robots, with concomitant attention paid to the development of methods that ensure their safety during sailing. Sailboats are affected by obstacles and by nonlinear aerodynamic and hydrodynamic factors. In particular, sailboats are affected by the wake generated by a moving vessel, which in this letter is denoted as “moving boat”. Wakes are swift and can have severe adverse effects on a sailboat by causing it to veer off course, stall or capsize. Moreover, sailboats have low mobility and large inertia and will therefore struggle to avoid a wake. Thus, in this letter, we describe our efforts to develop a method to enable a sailboat to perform wake avoidance. We model the wake as a Kelvin wake and generate waypoints for an orientation-restricted Dubins path-based Kelvin wake-avoidance method. A V-stability-based control method has proven suitable for generating the path, after which the desired heading angle for sailboat control is obtained. The resulting wake-avoidance method is verified in simulations and experiments. It enables the sailboat to avoid alongside and toward wakes, and the qualitative results have revealed that the maximum range of roll in alongside scenario and maximum range of surge acceleration in toward scenario are reduced by 57.4% and 23.4%, respectively, relative to a situation when no wake-avoidance method was used. The maximum range of roll in toward scenario is acceptable.
5 June 2025 in IEEE Transactions on Robotics
Sailboats are purely wind-driven and thus have great potential for long-term voyaging. For robotic sailboats, the constraints on the energy of the control boards, sensors, communication modules, and actuators are crucial to the sustainability of automation. Reducing the control frequency of actuators is crucial for energy conservation. This study proposes an energy-efficient long-short term (EeLsT) approach for sustainable sailing. In EeLsT, long-term and short-term observers are designed to adaptively take control decisions for time-varying environmental influences (e.g., waves and currents). Our approach can be generally applied as an energy management module in sailing robots. It explicitly leverages the sailing motion characteristics and the dynamic model of the robot considering marine disturbances. We have designed an experimental enhanced simulation platform to evaluate motion performance and energy consumption. Both baseline approach and the scheme incorporating EeLsT method (refer to as EeLsT approach in the subsequent sections) have been conducted. In simulation, EeLsT approach saves 31.8% energy. In the real marine environment, experiments are conducted with OceanVoy, a catamaran sailing robot. The results show that 27.4% of the energy is saved during stable sailing. In long-term sailing, compared to the standby mode when the motors are not working, the average power of the full automation mode has increased by no more than 1 W, i.e. 4% relatively.