28 January 2026 in Nature Communications
Solar-driven atmospheric water harvesting (SAWH) holds significant promise for decentralized water supply. However, its widespread application is hindered by two critical limitations: underutilization of high-humidity adsorption windows during nighttime and insufficient desorption during daytime due to the high desorption temperature requirement of conventional sorbents. To overcome these challenges, this study proposes a composite sorbent strategy by synergistically combining the low enthalpy of vaporization of LiCl with the robust adsorption capacity and stability of a metal‒organic framework (MOF, specifically Ni2Cl2(BTDD), H2BTDD = bis(1H−1,2,3-triazolo[4,5-b],[4′,5′-i])dibenzo[1,4]dioxin). This design leverages the complementary properties to achieve lower desorption temperatures (e.g., < 60 oC in device level) compared to typical MOF-based systems (usually >90 oC in device level), thereby significantly reducing the energy consumption for desorption. Concurrently, the composite exhibits extended adsorption duration within the high-humidity window. Field validation across diverse climatic regions demonstrates the composite’s exceptional wide-range environmental stability and performance. The resulting SAWH device achieves a solar-to-water generation improvement up to 91% in a continental field test. This work presents a generalizable and effective pathway for enhancing SAWH performance through synergistic material engineering, enabling efficient water production and thermal control under varying environmental conditions.
2 May 2026 in SSRN Electronic Journal
Atmospheric water harvesting (AWH) is widely regarded as a promising pathway to alleviate water scarcity. However, most existing studies have focused either on the development of novel sorbent materials or on small-scale prototype demonstrations under high-humidity conditions. Stable large-scale water production under cold and arid conditions with low absolute humidity remains insufficiently explored. In this study, a continuous sorption-based AWH system using a desiccant wheel was proposed and experimentally developed. The effects of regeneration air velocity, regeneration temperature, and wheel rotational speed on system performance were systematically investigated. The results show that the system achieved the best overall performance at a regeneration air velocity of 4.06 m/s, a regeneration temperature of 97 °C, and a wheel speed of 13 r/h. Under these conditions, the maximum water production rate reached 2.15 L/h, while the minimum specific energy consumption (SEC) was 2.04 kWh/L. Seasonal outdoor experiments further demonstrated that the device could maintain stable water production under different climatic conditions, indicating strong cross-seasonal adaptability. In addition, under winter cold-arid conditions, the device operated continuously throughout the day, yielding 28.5 L/day with an SEC of 2.6 kWh/L, corresponding to a thermal efficiency of approximately 24%. These results demonstrate that the system can realize stable and continuous water production under low-temperature and low-humidity conditions, exhibiting strong environmental adaptability and considerable engineering potential. The study provides a feasible technical solution for distributed freshwater supply in cold and arid regions.
19 November 2026 in Device