22 February 2024 in Chemical Engineering Journal
13 June 2018 in Journal of Applied Physics
A detailed study was carried out to investigate the effects of poling on structure, vibrational, dielectric, and ferroelectric properties of donor-doped (V5+ at Ti4+-site) lead-free Na0.47Bi0.47Ba0.06Ti(1-x)VxO3, (x = 0, 0.01, and 0.03) ceramics fabricated via a modified sol-gel method. Rietveld refinement of synchrotron radiation source powder x-ray diffraction data showed that unpoled samples are in rhombohedral R3c phase whereas poled samples showed a mix rhombohedral R3c and tetragonal P4mm phases at ambient temperature, due to a long-range order established in lattice system after poling. V+5 doping increases the rhombohedral distortion in unpoled and poled samples while it reduces the tetragonality in poled samples. Vibrational study revealed that unpoled samples have more lattice disorder compared to poled samples. X-ray absorption near edge spectroscopy measurement confirmed that Ti and V are in 4+ and 5+ oxidation states, respectively, for all poled and unpoled samples. The average grain size was found to decrease from 5.6 ± 0.5 μm for x = 0 to 1.0 ± 0.2 μm for x = 0.03. Depolarization temperature was found to increase significantly in poled samples from ∼104 °C for undoped sample to 150 °C for the sample with 1% vanadium substitution. Drastic improvements in ferroelectric and dielectric properties are explained in terms of structural changes. High remnant polarization Pr ∼ 31.4 μC/cm2 and moderately low coercive field Ec ∼ 20 kV/cm have been observed at an applied electric field of ∼35 kV/cm for the sample with 1% vanadium substitution which makes it an attractive candidate for ferroelectric applications.
22 March 2018 in Journal of Applied Physics
The phase purity and crystal structure of Pb(1-x)LaxTi(1-x)AlxO3 (0 ≤ x ≤ 0.25) samples (synthesized via the sol-gel process) were confirmed using synchrotron x-ray powder diffraction (XRD) (wavelength, λ = 0.44573 Å). Rietveld analyses of powder x-ray diffraction data confirmed the tetragonal structure for compositions with x ≤ 0.18 and cubic structure for the sample with x = 0.25. Temperature-dependent XRD was performed to investigate the structural change from tetragonal to cubic structure phase transition. Raman spectroscopy at room temperature also confirmed this phase transition with compositions. Field emission scanning electron microscopy (FESEM) provided information about the surface morphology while an energy dispersive x-ray spectrometer attached with FESEM confirmed the chemical compositions of samples. Temperature and frequency dependent dielectric studies showed that the tetragonal to cubic phase transition decreased from 680 K to 175 K with an increase in the x from 0.03 to 0.25, respectively. This is correlated with the structural studies. Electric field dependent spontaneous polarization showed a proper ferroelectric loop for 0.06 ≤ x ≤ 0.18 belonging to a tetragonal phase, while for x ≥ 0.25, the spontaneous polarization vanishes. Bipolar strain versus electric field revealed a butterfly loop for 0.06 ≤ x ≤ 0.18 compositions. Energy storage efficiency initially increases nominally with substitution but beyond x = 0.18 enhances considerably.
14 December 2020 in Physical Review Research
Here, we present a detailed theoretical and experimental study on the pressure induced switching of the anomalous Hall effect (AHE) in the triangular antiferromagnetic (AFM) compound . Our theoretical model suggests pressure driven significant splitting of the in-plane Mn bond lengths, i.e., an effective trimerization, which in turn stabilizes a helical AFM ground state by modifying the interplane exchange parameters in the system. We experimentally demonstrate that the AHE in reduces from cm at ambient pressure to zero at an applied pressure of about 1.5 GPa. Furthermore, our pressure dependent magnetization study reveals that the conventional triangular AFM ground state of systematically transforms into the helical AFM phase where the symmetry does not support a nonvanishing Berry curvature required for the realization of a finite AHE. The pressure dependent x-ray diffraction study rules out any role of structural phase transition in the observed phenomenon. In addition, the temperature dependent in-plane lattice parameter at ambient pressure is found to deviate from the monotonic behavior when the system enters into the helical AFM phase, thereby supporting the proposed impact of trimerization in controlling the AHE. We believe that the present study makes an important contribution toward understanding the stabilization mechanism of different magnetic ground states in and related materials for their potential applications pertaining to AHE switching.
6 February 2019 in Journal of Applied Physics
The effects of electric field and temperature on structural, dielectric, and ferroelectric properties of (1 – x)(Na0.50Bi0.50TiO3)-xAgTaO3 (x = 0, 0.03, 0.05, and 0.10) ceramics prepared via the modified sol-gel method were investigated. Rietveld refinement of synchrotron radiation x-ray diffraction data (SRPXRD) confirmed the rhombohedral (R3c) phase in all the unpoled samples. After poling, the samples remained in the rhombohedral phase for x ≤ 0.03, whereas for x ≥ 0.05, it showed a mixed rhombohedral and tetragonal (P4bm) phase. The anti-phase octahedral tilt angle was found to increase from 8.49° to 9.50° (for x = 0) and from 7.60° to 7.85° (for x = 0.10) with poling due to the long-range ordering phenomenon in the lattice system. The temperature-dependent dielectric study showed that the depolarization temperature decreases with increasing composition. Unpoled x = 0.10 composition exhibited the wide thermal stability dielectric constant in the temperature range 120-450 °C with 1795 ± 15% (tan δ < 0.041). Polarization versus electric field measurement revealed that at room temperature, the presence of anti-ferroelectric ordering increases the energy storage efficiency from 2.6% (for x = 0) to 48.2% (for x = 0.10). With increasing temperature, it increased from 48.2% (30 °C) to 85.5% (140 °C) for x = 0.10 composition. Improvement in the energy storage efficiency was correlated with structural changes probed by temperature dependent SRPXRD measurements; it confirmed the increase in antiferroelectric ordering with increasing temperature. Dielectric and ferroelectric results indicate the usefulness of this material system in the field of wide thermal stability dielectric constant and high-temperature energy storage applications.
1 December 2020 in Electrochimica Acta