28 April 2022 in ACS Applied Electronic Materials
21 September 2021 in IEEE Transactions on Electron Devices
Artificial synapse with good linearity is a critical issue in conductive bridging random access memory (CBRAM) synaptic device to accomplish an efficient learning approach in the artificial intelligence system. In this work, we investigate a novel approach to enhance the linearity of CBRAM synapse. The linearity of a memristive synapse can be improved by the high-temperature vacuum annealing process. The annealed device not only improves reliability such as endurance characteristics but also improves the synaptic characteristics including multilevel characteristics with varying RESET stop voltages from −0.60 to −1.40 V. The nonlinearities of potentiation and depression are 1.36 and −2.18 with 500 conductance pulses, respectively, and the device exhibits 720 training epochs with a total number of 720 000 pulse numbers. The post oxide annealed CBRAM device with analog switching behavior and excellent reliability is potential to be an artificial synapse for neuromorphic computing. In addition, the experimental potentiation and depression data are employed to train HNN for image processing of $30\times30$ pixels comprising 900 synapses. It is found that the HNN can be successfully trained to recognize the input image with a training accuracy of ~98% in 18 iterations.
12 February 2018 in Nanotechnology
In this work, the transparent bipolar resistive switching characteristics of a SiCN-based ITO/SiCN/AZO structure due to In diffusion from ITO is studied. The SiCN based device is found to be 80% transparent in the visible wavelength region. This device, with AZO as both top and bottom electrodes, does not show any RRAM property due to deposition of the high quality O 2 -free SiCN film. Replacing the AZO top electrode with ITO in this device results in good resistive switching (RS) characteristics with a high on/off ratio and long retention. Replacing the SiCN film with ZrO 2 also results in excellent RS characteristics due to the formation of an oxygen vacancies filament inside the ZrO 2 film. A resistance ratio of on/off is found to be higher in the SiCN based device compared to that of the ZrO 2 device. Diffusion of In from ITO into the SiCN film on application of high positive voltage during forming can be attributed to the occurrence of RS in the device, which is confirmed by the analyses of energy dispersive spectroscopy and secondary-ion mass spectrometry. This study shows a pathway for the fabrication of CBRAM based transparent devices for non-volatile memory application.
17 March 2020 in IEEE Electron Device Letters
In this letter, ZrN-based resistive random access memory (RRAM) is investigated for flexible memory applications for the near future. Due to the room-temperature fabrication process, the device is suitable for low-temperature flexible monolithic technologies. The TiN/ZrN/TiN device exhibits excellent AC endurance cycling (107), a rapid speed (45 ns) and stable retention (104 s) at 100°C without any degradation. In addition, RRAM devices built with an additional HfN interface layer exhibit small operational voltage variations and stable switching characteristics. The flexibility of the device is excellent, and it maintains excellent electrical characteristics at a bending radius of up to 4 mm.
14 August 2020 in IEEE Transactions on Electron Devices
Photograph response in transparent devices has been a hot area of investigation, with several material systems being used to generate a response to illumination. In this study, we propose an ITO/MgO/HfO₂/ITO bilayer (BL) transparent resistive switching (RS) device that exhibits a photograph response through defect engineering in the switching layer, which resulted in a subsurface active RS location in the formed conductive filament, thus reducing the loss of oxygen through the polycrystalline electrode. We observe that the switching performance is enhanced in the ITO/MgO/HfO₂/ITO BL device as compared to the ITO/HfO₂/ITO single-layer device with the insertion of MgO layer between the ITO top electrode and HfO₂ RS layer. The device shows excellent on/off ratio (~10⁷), high and stable dc electrical set and optical reset endurance (>1000 cycles without degradation), excellent retention (>10⁴ s at 85 °C), high transparency (>85% transmittance in the visible spectrum), and a response time of 30 μs for the optical reset. This study lays the foundation for future work involving oxide defect-based optical functionalization in RS devices with the possibility for being used in photograph sensing.
9 January 2023 in IEEE Transactions on Electron Devices
In this study, a transparent bilayer memristor showing both electrical and optical synapses along with good electrical properties after annealing is presented. In addition to 85% transparency, the device shows excellent electrical characteristics for 1000 cycles of stable LRS/HRS and more than 104 s retention at high temperatures. The annealed device also exhibits stable potentiation and depression cycles for more than 10 000 ac pulses with a low coefficient of nonlinearity. By applying consecutive ac pulses, synaptic properties of paired-pulse facilitation (PPF) and spike time-dependent plasticity (STDP) are calculated. The memristor is illuminated by a 405 nm light source in which different light intensities ranging from 20 to 40 mW/cm2 are used for achieving multilevel cell (MLC) characteristics. Learning/Forgetting curve (PSC) and optical PPF are measured to mimic optical synaptic function. An image recognition comparison of optical and electrical synaptic properties with a normalized loss rate of < 0.1 is obtained after just 100 epoch trainings. These excellent attributes of this transparent memristor make it a promising candidate for electrical/optical memory devices or for using it as an optically synaptic sensor device.