17 August 2017 in Shock and Vibration
This study focuses on seismic fragility assessment of horizontal curved bridge, which has been derived by neural network prediction. The objective is the optimization of structural responses of metaheuristic solutions. A regression model for the responses of the horizontal curved bridge with variable coefficients is built in the neural networks simulation environment based on the existing NTHA data. In order to achieve accurate results in a neural network, 1677 seismic analysis was performed in OpenSees. To achieve better performance of neural network and reduce the dimensionality of input data, dimensionality reduction techniques such as factor analysis approach were applied. Different types of neural network training algorithm were used and the best algorithm was adopted. The developed ANN approach is then used to verify the fragility curves of NTHA. The obtained results indicated that neural network approach could be used for predicting the seismic behavior of bridge elements and fragility, with enough feature extraction of ground motion records and response of structure according to the statistical works. Fragility curves extracted from the two approaches generally show proper compliance.
27 December 2019 in KSCE Journal of Civil Engineering
12 December 2024 in Engineering Computations
Purpose: It evaluated the seismic vulnerability based on fewer factors by presenting the effectiveness of seismic and structural parameters. The proposed method first demonstrated the effect of earthquake ground motion inputs on predicting the slight, moderate, extensive and collapse limit states and confirmed the method’s efficiency. The fragility curves illustrated with the approach of the present study are compared with the traditional techniques, such as analytical methods.Design/methodology/approach: Based on the different macro- and micro-structural characteristics and the earthquake records, achieving a certain relation from regression analysis using artificial neural networks (ANNs) is difficult. With this background in mind, the present study aimed to compare the proposed model of the considered bridge with the analytical and ANN results. After statistical analysis and estimation of the most effective factors in predicting responses from the proposed approach, two-parameter two- and three-dimensional fragility curves are extracted. Findings: Due to the structural differences between horizontally curved bridges, the methodology does not require any classification of bridge classes to predict responses. For a specific L/R of the bridge, the parameters cumulative absolute velocity (CAV) and Sa (T1) can provide a good estimate of the seismic fragility curves, and the proposed approach with less parameter assignment also leads to good results. With less computational effort, fragility curves can be illustrated.Originality/value: The proposed method demonstrated the ability to accurately estimate the occurrence and non-occurrence limit states while maintaining a low computational cost and the derivation of a curved bridge’s seismic fragility curve.
25 October 2021 in Stavební obzor - Civil Engineering Journal
This study presents a comparison of two methods used for retrofitting Reinforced Concrete (RC) beams, namely, the Externally Bonded Reinforcement (EBR) and the Near-Surface Mounting (NSM) methods. A parametric analysis was carried out using variables such as the retrofitted, the retrofitting method (EBR and NSM), and the thickness of the Carbon Fiber-Reinforced Polymer (CFRP) sheets. To achieve this goal, the finite element method and ABAQUS software were employed. An un-retrofitted beam was also simulated as the control specimen for comparison. Beam responses were compared through load–displacement and energy absorption capacity diagrams. Results show that the higher energy absorption capacity in all CFRP-retrofitted RC beams, which was 1.69–5.54 times higher than in un-retrofitted beams. In the case where half of the beam was reinforced using CFRP sheets, the entire beam assembly and the CFRP sheet contributed to load-bearing, thus delaying crack nucleation in the beam and increasing its energy absorption capacity. As a result, the energy absorption capacity of the beam, in this case, was less than that obtained in the previous one where half the span of the beam was retrofitted.
30 December 2025 in Structural Integrity and Life
One of the important criteria in the concrete structure design is to investigate the flexural behaviour of concretes. The flexural strength and fracture energy are the resulting parameters from the bending test of concrete samples. In order to investigate and improve the concrete specifications, two pozzolans and also two types of fibres have been used in concrete samples. The behavioural effect of each material (zeolite pozzolan and silica fume, steel fibres, and glass) and also their effect have been evaluated simultaneously. One of the new subjects over the last years regarding the concrete behaviour is to consider the preloading in fibre concretes in this study. The results demonstrate that increasing fibres in designs without pozzolan bring about different results. In these designs, increasing glass fibres did not significantly increase flexural strength, while increasing steel fibres increased flexural strength. Besides, in designs with combined preloading, the difference in results decrease by reducing 2 % of silica fume. Accordingly, it can be concluded that zeolite pozzolan plays a more active role in curing cracks for short periods. In assessing the fracture energy of samples, the samples containing 1 % steel fibres indicate greater fracture energy.