Context. NOTT (formerly Hi-5) is a new high-contrast L′ band (3.5–4.0 µm) beam combiner for the VLTI designed with an ambitious aim to be sensitive to young giant exoplanets down to 5 mas separation around nearby stars. The performance of nulling interferometers in these wavelengths is affected both by fundamental noise from the background and contributions of instrumental noise. This motivates the development of end-to-end simulations to optimize these instruments. Aims. The aim of this study is to enable a performance evaluation of NOTT and inform the design of such instruments with current and future infrastructures in mind, taking into account the different sources of noise and their correlation. Methods. SCIFYsim is an end-to-end simulator for single-mode-filtered beam combiners, with an emphasis on nulling interferometers. We use it to compute a covariance matrix of the errors. We then use statistical detection tests based on likelihood ratios to compute compound detection limits for the instrument. Results. With the current assumptions as to the performance of the wavefront correction systems, the errors are dominated by correlated instrumental errors down to stars of magnitude 6–7 in the L band, beyond which thermal background from the telescopes and relay system becomes dominant. Conclusions. SCIFYsim is suited to anticipating some of the challenges of design, tuning, operation, and signal processing for integrated-optics beam combiners. The detection limits found for this early version of NOTT simulation with the unit telescopes are compatible with detections at contrasts up to 105 in the L band at separations of 5–80 mas around bright stars.
1 April 2023 in Journal of Astronomical Telescopes, Instruments, and Systems
European Southern Observatory (ESO)’s Very Large Telescope Interferometer (VLTI), Paranal, Chile, is one of the most proficient observatories in the world for high angular resolution astronomy. It has hosted several interferometric instruments operating in various bandwidths in the infrared. As a result, the VLTI has yielded countless discoveries and technological breakthroughs. We propose to ESO a new concept for a visitor instrument for the VLTI: Asgard. It is an instrumental suite comprised of four natively collaborating instruments: High-Efficiency Multiaxial Do-it ALL Recombiner (HEIMDALLR), an all-in-one instrument performing both fringe tracking and stellar interferometry with the same optics; Baldr, a Strehl optimizer; Beam-combination Instrument for studying the Formation and fundamental paRameters of Stars and planeTary systems (BIFROST), a combiner whose main science case is studying the formation processes and properties of stellar and planetary systems; and Nulling Observations of dusT and planeTs (NOTT), a nulling interferometer dedicated to imaging young nearby planetary systems in the L band. The overlap between the science cases across different spectral bands yields the idea of making the instruments complementary to deliver sensitivity and accuracy from the J to L bands. Asgard is to be set on the former AMBER optical table. Its control architecture is a hybrid between custom and ESO-compliant developments to benefit from the flexibility offered to a visitor instrument and foresee a deeper long-term integration into VLTI for an opening to the community.
1 January 2024 in Journal of Astronomical Telescopes, Instruments, and Systems
Asgard/NOTT (previously Hi-5) is a European Research Council (ERC)-funded project hosted at KU Leuven and a new visitor instrument for the Very Large Telescope Interferometer (VLTI). Its primary goal is to image the snow line region around young stars using nulling interferometry in the L′-band (3.5 to 4.0) μm, where the contrast between exoplanets and their host stars is advantageous. The breakthrough is the use of a photonic beam combiner, which only recently allowed the required theoretical raw contrast of 10−3 in this spectral range. Nulling interferometry observations of exoplanets also require a high degree of balancing between the four pupils of the VLTI in terms of intensity, phase, and polarization. The injection into the beam combiner and the requirements of nulling interferometry are driving the design of the warm optics and the injection system. The optical design up to the beam combiner is presented. It offers a technical solution to efficiently couple the light from the VLTI into the beam combiner. During the coupling, the objective is to limit throughput losses to 5% of the best expected efficiency for the injection. To achieve this, a list of different loss sources is considered with their respective impact on the injection efficiency. Solutions are also proposed to meet the requirements of beam balancing for intensity, phase, and polarization. The different properties of the design are listed, including the optics used, their alignment and tolerances, and their impact on the instrumental performances in terms of throughput and null depth. The performance evaluation gives an expected throughput loss <6.4% of the best efficiency for the injection and a null depth of ∼2.10−3, mainly from optical path delay errors outside the scope of this work.
Context . The NOTT visitor instrument at the VLTI is designed to characterize hot exozodiacal dust and young Jupiter-like planets at the water snowline via L ′ band nulling interferometry. The beam combination will be achieved by a four-telescope integrated optics beam combiner, which should fulfill specific requirements. Aims . Our goal was to manufacture the mid-infrared integrated optics beam combiner for NOTT based on the double-Bracewell architecture and to run a detailed laboratory characterization in the L ′ band. In particular, our focus was on the achievable raw and self-calibrated nulling ratios. Methods . We used a setup based on a double Michelson interferometer to produce four broadband-coherent beams simulating the four telescopes of the VLTI and perform broadband nulling at room temperature. We also analyzed the modal, chromatic, and polarization behavior of the integrated optics beam combiner, and we measured its total throughput. Results . We were able to manufacture a single-mode four-telescope double-Bracewell beam combiner in gallium lanthanum sulfide mid-infrared transparent chalcogenide glass using ultrafast laser inscription. We show that the directional couplers forming the four-telescope beam combiner (4T-nuller) have an achromatic splitting ratio across the band 3.65–3.85 μm with a 40/60 and 50/50 splitting for the side couplers and the central coupler, respectively. We report a total throughput of 37%, including the Fresnel losses that will be mitigated with antireflection coatings, and we quantified the differential birefringence. Operating at room temperature with a 200 nm bandwidth centered at 3.8 μm and without polarization control, we measured an average raw null of 8.13 ± 0.03 × 10 −3 and a self-calibrated null of 1.14 ± 0.01 × 10 −3 . Finally, we show that a θ6 broad null can be experimentally reproduced in these conditions. This is, to our knowledge, the first measurement of a broadband L ′ deep null obtained with a four-telescope integrated optics beam combiner. Conclusions . Following these promising results, the next step would involve testing the performance of the 4T-nuller in cryogenic conditions.
1 April 2026 in Journal of Astronomical Telescopes, Instruments, and Systems
The success of the Large Interferometer For Exoplanets (LIFE) space mission depends on measuring the faint mid-infrared emission spectra of exoplanets while suppressing the glare of a host star. This requires an instrument capable of high-contrast nulling interferometry with exceptional sensitivity. Although previous testbeds have proven the principle of deep, stable nulls, they have not combined high contrast with the high throughput and cryogenic operation required for LIFE. Here, we present the architecture of the Nulling Interferometry Cryogenic Experiment (NICE), a mid-infrared nulling testbed, to increase the technological readiness of LIFE. We derive the laboratory requirements necessary to validate the LIFE beam combiner and present the optical design of NICE. Finally, we report results from the ambient “Warm Bench” precursor, which has successfully demonstrated the required null depth (17%) using one of the two nulling channels.
Context. During the Hunt for Observable Signatures of Terrestrial Systems (HOSTS) survey by the Large Binocular Telescope Interferometer (LBTI), an excess emission from the main-sequence star, θ Boo (F7V spectral type, 14.5 pc distance) was observed. This excess indicates the presence of exozodiacal dust near the star’s habitable zone (HZ). Previous observations with Spitzer and Herschel show no evidence of outer cold dust within their respective detection limits. Because exozodiacal dust is generally believed to originate from material located farther out in the system, its source around θ Boo remains unclear. Aims. We conducted additional nulling and high-contrast adaptive optics (AO) observations to spatially constrain the dust distribution, search for variability, and directly image potential companions in the system. This study presents the results of these observations and provides an interpretation of the inner system’s architecture. Methods. We observed the star using the LBTI’s N′-band nulling mode during three epochs in 2017, 2018, and 2023. For each epoch, we modeled and constrained the dust distribution using the standard LBTI nulling pipeline, assuming a vertically thin disk with a face-on inclination. We also performed high-contrast AO observations in the L′-band and H-band to constrain the presence of substellar companions around the star. Results. We find several solutions for the dust distribution for each epoch. However, the LBTI nulling observations are unable to discriminate between them. Using upper limits from previous observations, we constrain the representative size of the dust grains to approximately 3-5 μm. We also measured a tentative increase in dust brightness at the Earth-equivalent insolation distance between 2017 and 2023. This increase corresponds to the injection of 4 × 10−8−4 × 10−7M⊕ of new material into the disk. We consider several options to explain the origin of the observed dust and its variability, but no clear sources are identified from the current observations, partly because our high-contrast AO observations could only constrain the presence of companions only down to 11 MJup at 1.3″ separation.