Bio-inspired Materials and Devices Laboratory (BMDL), Center for Energy Harvesting Materials and Systems (CEHMS), Virginia Tech, Blacksburg, VA 24061, USA
Auto-generated profile, based on publicly available information
Yuan Zhou
Bio-inspired Materials and Devices Laboratory (BMDL), Center for Energy Harvesting Materials and Systems (CEHMS), Virginia Tech, Blacksburg, VA 24061, USA
In this study, we demonstrate self-biased magnetoelectric effect in homogenous two-phase magnetostrictive-piezoelectric laminates. Our results illustrate the method for tuning the magnitude of self-bias effect and provide understanding behind the hysteretic changes. We model this phenomenon by considering the magnetization hysteresis with shape-induced demagnetization effect. The self-biased response was found to be directly related to the nature of magnetization and can be tuned by variation in demagnetization state and the resultant differential magnetic flux distribution. These results present significant advancement toward development of AC magnetic field sensor and magnetoelectric composite based on-chip devices by eliminating the need for DC bias.
We report a magnetoelectric energy harvester structure that can simultaneously scavenge magnetic and vibration energy in the absence of DC magnetic field. The structure consisted of a piezoelectric macro-fiber composite bonded to a Ni cantilever. Large magnetoelectric coefficient ∼50 V/cm Oe and power density ∼4.5 mW/cm3 (1 g acceleration) were observed at the resonance frequency. An additive effect was realized when the harvester operated under dual-phase mode. The increase in voltage output at the first three resonance frequencies under dual-phase mode was found to be 2.4%, 35.5%, and 360.7%. These results present significant advancement toward high energy density multimode energy harvesting system.
We demonstrate a near-flat self-biased magnetoelectric (ME) effect in geometry gradient magnetostrictive-piezoelectric laminates. The near-flat behavior was characterized by a stable ME response over a wide range of magnetic DC bias. By adjusting the configuration of the magnetostrictive layer, we were able to control the magnitude of the self-biased magnetoelectric coefficient. The ME response was found to be almost independent of the applied DC bias in the range of 0∼260 Oe. This bandwidth was almost 650%∼3800% higher than that of the conventional ME composites. This significant advancement opens great potential towards the development of high stability/sensitivity magnetic field sensors and energy harvesters.
In this paper, we analyze and elucidate the microstructure and surface morphology evolution of the piezoelectric BaTiO3 films grown by pulsed laser deposition on platinized silicon substrates. The films exhibited a columnar structure where the surface morphology evolved from a pyramid to star-like to hexagram shape with (111)-preferred orientation and increasing film thickness. In each column, a twin lamellae structure was formed that was found to enhance the lateral growth and coalescence of the grains. The high stability along the reentrant angle of the twin lamellae controlled the competition between the columnar growth and their coarsening. We present a growth model for BaTiO3 films and demonstrate the correlation of the growth mode and lamella twins during morphological evolution.