22 June 2012 in Geotechnical and Geological Engineering
1 January 2013 in Materials & Design (1980-2015)
1 June 2020 in Construction and Building Materials
23 October 2015 in International Journal of Pavement Engineering
Recycling of highway materials is an effort to preserve the natural environment, reduce waste and provide a cost-effective way for construction of highways. The reclaimed asphalt pavement (RAP) contains stiffened binder caused by loss of volatile materials and oxidation. Hence, the addition of high amount of the RAP to asphalt mix may make it prone to fatigue failure. Due to this reason, addition of RAP to asphalt mixture in substantial amount has been a challenge so far. Therefore, ‘rejuvenators’ which are supposed to restore chemical and physical properties of the aged asphalts are used effectively in asphalt mixture. In this study, two locally available oils, i.e. pongamia oil (locally known as Karanja oil) derived from the seeds of Pongamia pinnata and a composite rejuvenator made of castor oil and coke oven gas condensate have been explored for rejuvenating the aged binder. The rheological properties of aged binder and rejuvenated binders were studied using a dynamic shear rheometer. From the various rheological tests conducted, it was found that certain proportion of pongamia oil as well as composite castor oil was able to impart desirable rutting as well as fatigue performance for the rejuvenated binder samples. The thermal analysis carried out using thermogravimetric analysis ensured adequate thermal stability for the binder specimens treated with these oils. In terms of binder performances, it was found that these oils could be considered as suitable rejuvenators for effectively restoring properties of the aged binder. Performance studies on RAP mixes may be extended for recommending these two oils as rejuvenators for hot mix pavement recycling.
22 November 2018 in Road Materials and Pavement Design
Granular lateritic soils are available in many parts of the world including India and usually this does not meet the specifications for aggregates used in unbound granular layers of pavements. But, with depletion of sources for good quality aggregates, it has become necessary to use such marginal materials in pavement structural layers through proper stabilisation. Material characterisation is very essential in mechanistic design of pavements and therefore an attempt has been made in this study to evaluate the mechanical properties of cement stabilised granular lateritic soils (CLS), which would be useful during mechanistic design of pavements. The characterisation covers determination of unconfined compressive strength (UCS) in soaked and un-soaked state, flexural strength (FS) or modulus of rupture, indirect tensile strength (IDT) and flexural modulus (FM) through a detailed laboratory investigation process. For carrying out this study, soils were collected from three different sources located in the eastern part of India. Relationships have been established between different mechanical properties, which will help the designers to predict suitable stiffness/modulus values for pavement analysis. Effectiveness of the strength ratio (soaked/un-soaked strength) in evaluating the suitability of CLS as a bound material for pavements has also been discussed in this paper.
4 May 2016 in Road Materials and Pavement Design
The aged pavement material from a defunct pavement – commonly known as reclaimed asphalt pavement (RAP) – contains stiffened binder caused by loss of volatile materials and oxidation. Therefore, addition of a high amount of the RAP to asphalt mix, in case of pavement recycling, may make it prone to fatigue failure. Due to this reason, the addition of RAP to asphalt mixture in substantial amount has been a challenge so far. “Rejuvenators” are generally used to restore the properties of the aged binders in the recycled mixes. The present study deals with the assessment of two non-edible oils, that is, pongamia oil and composite castor oil (a composite rejuvenator having castor oil and coke-oven gas condensate) as asphalt rejuvenators to achieve 100% RAP recycling. The study mainly comprises rheological characterisation studies such as rutting behaviour, fatigue behaviour, dynamic mechanical analysis and creep-recovery studies of the rejuvenated binder specimens. Chemical investigations using infrared spectroscopy also affirmed use of these oils in effectively restoring the properties of aged binders. In addition, for assessment of the long-term performance in terms of thermostability of the rejuvenated binders, a thermal analysis was carried out using a simultaneous thermal analyser, which confirmed the adequate thermal stability of the rejuvenated binders. From the investigations taken up under this study, it was concluded that 5% oil (for both pongamia and composite castor oil) rejuvenated aged binder could show desirable rutting and fatigue behaviours and sometimes even better than the virgin binder. However, its confirmation can be laid only after suitable mix performance studies.