The repeatability of an additive manufacturing (AM) process that fabricates a unique specimen with inherent damping capability is explored. A laser powder bed fusion (LPBF) technique is used to additively manufacture nickel alloy components with the same geometry/dimensions. Key aspects to the manufacturing process such as scan strategy and build orientation are observed alongside damping performance. The results from forced-response testing show repeatable correlation between damping performance and modal response information. Furthermore, despite different scan strategies and build sequences, the results demonstrate that inherent damping repeatability is driven by the unique component geometry and has minimal sensitivity to manufacturing.
12 March 2019 in Journal of Engineering Materials and Technology
The vibration bending fatigue life uncertainty of additively manufactured titanium (Ti) 6Al-4V specimens is studied. In this investigation, an analysis of microscopic discrepancies between ten fatigued specimens paired by stress amplitude is correlated with the bending fatigue life scatter. Through scanning electron microscope (SEM) analysis of fracture surfaces and grain structures, anomalies and distinctions such as voids and grain geometries are identified in each specimen. These data along with previously published results are used to support assessments regarding bending fatigue uncertainty. The understanding gained from this study is important for the future development of a predictive vibration bending fatigue life model.
3 September 2021 in Journal of Engineering for Gas Turbines and Power
The fatigue life behavior and internal surface conditions of inherently damped additive manufactured (AM) specimens subjected to vibration bending are under investigation. This study supports research that demonstrated 95% vibration suppression due to damping capability of AM components with 1–3% internal volume of unfused powder; however, the viability of fatigue performance is unknown. The following effort explores whether internal wall damage caused by unfused powder particle motion debits fatigue life. Comparisons between the fatigue behaviors of unfused powder pocket and fully fused nickel based alloy 718 specimens confirms a long suspected powder interaction phenomena critical to damping performance.