1 October 2024 in AIAA Journal
Operating a conventional propeller at negative thrust results in the operation of positively cambered blade sections at negative angles of attack, leading to flow separation. Consequently, accurately simulating the aerodynamics of propellers operating at negative thrust poses a greater challenge than at positive thrust. This study offers a comprehensive assessment of the aerodynamic modeling capabilities of numerical methods, spanning low to high fidelity, for computing propeller performance across both positive and negative thrust regimes. Low-fidelity methods, namely, blade-element momentum and lifting line theories, effectively predict propeller performance trends at positive thrust. However, they fail to capture trends at negative thrust beyond the maximum power output point due to the neglect of three-dimensional flow effects. Both steady and unsteady Reynolds-averaged Navier–Stokes (RANS) simulations with [ ] perform well across both positive and negative thrust conditions, with errors below 2% for both thrust and power magnitudes near the maximum power output point. Lattice-Boltzmann very-large-eddy simulations (LB-VLESs) with [ ] exhibit excellent agreement with experimental data with less than 1% error near the maximum power output point but with significant computational costs. Conversely, LB-VLESs with [ ] offer a more economical approach to capture general trends with the computational cost of the same order as unsteady RANS. However, wall models introduce errors in modeling flow separation, leading to a 16% overestimation of power magnitude near the maximum power output point. The results highlight the necessity of using tools with increased fidelity levels when considering propeller operation at negative thrust compared to the conventional positive thrust regime.
1 March 2024 in Aerospace Science and Technology
1 June 2025 in AIAA Journal
This paper presents an improved approach for fast numerical modeling of the mutual aerodynamic interactions between a wing and tractor propellers for preliminary design purposes. Vortex methods are used to model the propeller and wing aerodynamic performance. The blade element momentum (BEM) method, which is used to model the propeller performance, is extended to allow for a nonuniform inflow field, such that the upstream effects of the wing can be included in the propeller performance modeling. The circulation distribution over the propeller blades is then used in the slipstream tube model (STM) to determine the time-averaged propeller slipstream velocities. Finally, an improved vortex lattice method (VLM) is used to model the wing’s spanwise lift distribution. The method includes an often overlooked correction for the finite slipstream dimensions experienced by the wing segments, in both vertical extent and spanwise extent. This physics-based correction, based on the image vortex technique, partially offsets the large discrepancies in the lift augmentation found in previous low-order numerical analyses of propeller–wing interactions, while keeping the analysis routine computationally very cheap. The BEM and STM are validated against experimental data, while the VLM and complete propeller–wing system are validated against high-fidelity numerical data, confirming the accuracy of the used models. Discrepancies are found in regions or operating conditions where viscosity becomes more relevant, such as separated flows. The numerical model derived in this paper can be used for a quick and accurate first-order estimation of the aerodynamic performance of new conceptual distributed propeller aircraft.
1 February 2026 in The Journal of the Acoustical Society of America
Building-generated turbulence can significantly influence the propagation of noise from advanced air mobility (AAM) vehicles operating in urban environments, yet its impact on acoustic variability remains poorly quantified. In this study, the effect of an isolated building wake on sound propagation is investigated using time-resolved Lattice-Boltzmann very-large-eddy simulations. A simplified tonal acoustic source representative of an AAM vehicle is placed downstream of the building, and the resulting unsteady sound field is analyzed within and downstream of the turbulent wake. The results show that wake-induced turbulence produces pronounced temporal fluctuations in the received sound pressure level, with variability exceeding 3 dB in localized regions. These fluctuations extend beyond the physical extent of the wake due to interference effects and reflected propagation paths from the building and ground. Analysis along selected propagation directions indicates a strong correlation between turbulence-induced velocity fluctuations and acoustic variability along direct propagation paths, while this correlation weakens in regions dominated by multiple reflections. The findings emphasize the importance of accounting for unsteady, building-induced flow effects when evaluating AAM noise in urban environments.
1 March 2026 in JASA Express Letters
Turbulence from densely built urban structures alters the acoustic signature of advanced air mobility (AAM) vehicles, complicating prediction of noise impact. Ray tracing, using instantaneous frozen velocity-field snapshots from time-resolved simulations, provides an efficient approach for estimating turbulence-induced acoustic variability. Comparisons of the equivalent sound level (Leq), variability metric (L10−L90), and transient sound-level fluctuations show good agreement with a time-resolved reference solution, where discrepancies are mainly near the source and ground. Correlation analysis confirms that dominant temporal variability trends are reproduced at most observer locations, demonstrating that the method provides a reliable and computationally efficient framework for assessing AAM noise in urban environments.
1 October 2025 in AIAA Journal
Accurately determining experimental blade loading distributions is crucial for analyzing rotor performance but challenging due to the limitations of conventional measurement techniques. This paper presents a so-called wake-informed lifting line model that estimates blade loading distributions from phase-locked velocity measurements in the slipstream, eliminating the need for blade instrumentation. The model is evaluated against computational fluid dynamics (CFD) simulations under both attached and separated flow conditions. For the attached flow condition, the model achieves excellent agreement with CFD, with errors in the peak value of thrust distribution below 1%. In the separated flow condition, the model captures radial gradients and the shape of the thrust distribution but exhibits discrepancies in absolute values, with a 10% error in the peak value. These differences arise from the inherent limitations of the potential flow model, the increased significance of drag, and the heightened influence of the spinner’s presence in separated flows. Incorporating profile drag through external polar data improves the model prediction, reducing the error to 4%. The model cannot reliably predict power distributions without external polar data for both attached and separated flows due to the crucial role of drag in the torque direction. The application of the model to experimental flowfield data shows a performance similar to that of the validation case. Therefore, the wake-informed lifting line model offers a promising approach for obtaining experimental blade loading distributions, overcoming the limitations of traditional methods.