Monisha Ghosh

Monisha Ghosh

Auto-generated profile, based on publicly available information

Monisha Ghosh

University of Notre Dame

Research Focus & Metrics

Academic Career Length

14Years (2013-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
5 March 2024 in IEEE Open Journal of the Communications Society
Verified
Journal Article
Open access
SKSeongjoon Kang
Seongjoon Kang
MMMarco Mezzavilla
Marco Mezzavilla
SRSundeep Rangan
Sundeep Rangan
AMArjuna Madanayake
Arjuna Madanayake
SVSatheesh Bojja Venkatakrishnan
Satheesh Bojja Venkatakrishnan
ADAditya Dhananjay
Aditya Dhananjay
The upper mid-band – approximately from 7 to 24 GHz — has recently attracted considerable interest for new cellular services. This frequency range has vastly more spectrum than the highly congested bands below 7 GHz while offering more favorable propagation and coverage than the millimeter wave (mmWave) frequencies. In this regard, the upper mid-band has the potential to provide a powerful and complementary frequency range that balances coverage and capacity. Realizing cellular networks that exploit the full range of these bands, however, presents significant technical challenges. Most importantly, spectrum will likely need to be shared with incumbents including communication satellites, military RADAR, and radio astronomy. Also, the upper mid-band is simply a vast frequency range. Due to this wide bandwidth, combined with the directional nature of transmission and intermittent occupancy of incumbents, cellular systems will likely need to be agile to sense and intelligently use large spatial and frequency degrees of freedom. This paper attempts to provide an initial assessment of the feasibility and potential gains of such adaptive wideband cellular systems operating across the upper mid-band. The study includes: (1) a detailed ray tracing simulation to assess potential gains of multi-band systems in a representative dense urban environment and illustrate the value of a wideband system with dynamic frequency selectivity; (2) an evaluation of potential cross-interference between satellites and terrestrial cellular services and interference nulling to reduce that interference; and (3) design and evaluation of a compact multi-band antenna array structure. Leveraging these preliminary results, we identify potential future research directions to realize next-generation systems in these frequencies.

2 October 2023
Verified
Conference Paper
Open access
SDSeda Doğan
Seda Doğan
MRMuhammad I. Rochman
Muhammad I. Rochman
ATArmed Tusha
Armed Tusha
HNHossein Nasiri
Hossein Nasiri
JHJames Helzerman
James Helzerman
MGMonisha Ghosh
Monisha Ghosh
The Federal Communications Commission (FCC) has allocated the 6 GHz band (5.925 - 7.125 GHz) for unlicensed, shared use in the US. Incumbents in the band are protected via Low Power Indoor (LPI) rules that do not require the use of an Automatic Frequency Control (AFC) mechanism and Standard Power (SP) rules which do. As the deployment of Wi-Fi 6E APs implementing LPI rules have been increasing, there is limited research examining the real-world interference potential of dense LPI deployments to fixed links, which remains a concern for incumbents. We have conducted a first-of-its-kind extensive measurement campaign of a dense indoor Wi-Fi 6E network at the University of Michigan, which includes walking, driving, and drone measurements to assess outdoor beacon Received Signal Strength Indicator (RSSI), building entry loss (BEL), channel utilization, and appropriate enabling signal level for a proposed client-to-client (C2C) mode in 6 GHz. Our detailed measurements under various conditions show median outdoor RSSI between -75 dBm and -85 dBm, BEL between 12 dB and 16 dB through double-pane low-emission windows, and only 5% of indoor Basic Service Set Identifiers (BSSIDs) observed outdoors. Our overall conclusion is that the probability of interference to incumbent fixed links is low, but more research is required to determine the appropriate signal level for the C2C enabling signal.

1 December 2018
Verified
Conference Paper
Closed access
VRVanlin Sathya Robinson
Vanlin Sathya Robinson
MMMorteza Merhnoush
Morteza Merhnoush
MGMonisha Ghosh
Monisha Ghosh
SRSumit Roy
Sumit Roy
In this paper, we develop an algorithm, based only on energy detection, to detect the number of Wi-Fi basic service sets (BSSs) operating on the same channel. Such an algorithm can be used by a LTE-U base station (BS) to scale back its duty cycle when coexisting with Wi-Fi on the same channel. According to the LTE-U specification, a LTE-U BS scales back its duty cycle from 50% to 33% when it senses that the number of co-channel Wi-Fi BSSs has increased from one to two. There are two ways that this detection can be done: (a) decoding based, where the LTE-U BS decodes the Wi-Fi packet header to determine the unique Wi-Fi basic service set identification (BSSID) and (b) energy based, where only received energy levels are used to determine the number of Wi-Fi BSSs. The former approach requires an LTE-U BS to implement a Wi-Fi decoder and hence increases complexity, whereas the latter is easier to implement, requiring only an energy detector and appropriate detection thresholds to distinguish between one and two Wi-Fi APs. We analyze the latter approach and experimentally verify the feasibility of an energy detector to reliably distinguish between one and two Wi-Fi APs. In order to do so, we first experimentally determine appropriate detection thresholds using comprehensive measurements in realistic environments, both line-of-sight (LOS) and non-LOS (NLOS). These thresholds are then used to perform hypothesis based detection to devise an efficient algorithm that predicts presence of one or two Wi-Fi BSSs. The performance of the proposed algorithm is evaluated, both theoretically and experimentally, by utilizing two metrics (a) probability of detection (P D ) and (b) probability of false alarm (P FA ). We show that using a threshold of -42 dBm delivers greater than 80% P D and less the 5% P FA which we verify both theoretically and experimentally. Hence energy based detection is a low-complexity means of determining number of Wi-Fi BSSs to help LTE-U scale back its duty cycle appropriately.

10 March 2026 in Proceedings of the IEEE
Verified
Journal Article
Open access
GGGiovanni Geraci
Giovanni Geraci
FMFrancesca Meneghello
Francesca Meneghello
FWFrancesc Wilhelmi
Francesc Wilhelmi
DLDavid López-Pérez
David López-Pérez
IVIñaki Val
Iñaki Val
Boris BellaltaBoris Bellalta
Boris Bellalta
Today, Wi-Fi is over 25 years old. Yet, despite sharing the same branding name, today’s Wi-Fi boasts entirely new capabilities that were not even on the roadmap 25 years ago. This article aims to provide a holistic and comprehensive technical and historical tutorial on Wi-Fi, beginning with Institute of Electrical and Electronics Engineers 802.11b (Wi-Fi 1) and looking forward to IEEE 802.11bn (Wi-Fi 8). This is the first tutorial article to span these eight generations. Rather than a generation-by-generation exposition, we describe the key mechanisms that have advanced Wi-Fi. We begin by discussing spectrum allocation and coexistence, and detailing the IEEE 802.11 standardization cycle. Second, we provide an overview of the physical layer (PHY) and describe key elements that have enabled data rates to increase by over 1000×. Third, we describe how Wi-Fi medium access control (MAC) has been enhanced from the original distributed coordination function (DCF) to now include capabilities spanning from frame aggregation to wideband spectrum access. Fourth, we describe how Wi-Fi 5 first broke the one-user-at-a-time paradigm and introduced multi-user (MU) access. Fifth, given the increasing use of mobile, battery-powered devices, we describe Wi-Fi’s energy-saving mechanisms over the generations. Sixth, we discuss how Wi-Fi was enhanced to seamlessly aggregate spectrum across 2.4-, 5-, and 6-GHz bands to improve throughput, reliability, and latency. Finally, we describe how Wi-Fi enables nearby access points (APs) to coordinate in order to improve performance and efficiency. In the Appendix, we further discuss Wi-Fi developments beyond 802.11bn, including integrated millimeter-wave (IMMW) operations, sensing, security and privacy extensions, and the adoption of artificial intelligence (AI)/machine learning (ML).

7 May 2025 in IEEE Transactions on Cognitive Communications and Networking
Verified
Journal Article
Closed access
ATArmed Tusha
Armed Tusha
SDSeda Doğan
Seda Doğan
JPJoshua Roy Palathinkal
Joshua Roy Palathinkal
HNHossein Nasiri
Hossein Nasiri
MRMuhammad Iqbal Rochman
Muhammad Iqbal Rochman
MGMonisha Ghosh
Monisha Ghosh
The Federal Communications Commission (FCC) in the U.S. has made the Citizens Broadband Radio Service (CBRS) band (3.55 -3.7 GHz) available for commercial wireless usage under a shared approach, controlled by Spectrum Access System (SAS). This paper presents a first-of-its-kind extensive measurement campaign of a commercial CBRS network that quantifies both co-channel interference (CCI) and adjacent channel interference (ACI) caused by competing Generalized Authorized Access (GAA) devices and C-band 5G, respectively. We (i) identify a particular CCI scenario and improve performance by changing the frequency allocation based on our study of other allocations in the vicinity and (ii) quantify ACI from 5G in C-band using throughput. We investigate user-experienced propagation loss and compare it with calculated propagation loss using CBRS 1+ specified Irregular Terrain Model (ITM) and empirical signal propagation models. We conclude that (i) CCI and ACI for GAA users is not handled well by the SAS, (ii) proper frequency allocation for GAA requires additional analysis of interference from other GAA users followed by dynamical channel selection, (iii) utilization of immediate adjacent channels by high power 5G deployments limits the performance of CBRS, and (iv) CBRS 1+ specified ITM overpredicts propagation characteristics in non-line-of-sight (NLoS) area.

4 December 2024
Verified
Conference Paper
Open access
HNHossein Nasiri
Hossein Nasiri
STSeda Tusha
Seda Tusha
MRMuhammad Iqbal Rochman
Muhammad Iqbal Rochman
MGMonisha Ghosh
Monisha Ghosh
Robust classification of the operational environment of wireless devices is becoming increasingly important for wireless network optimization, particularly in a shared spectrum environment. Distinguishing between indoor and outdoor devices can enhance reliability and improve coexistence with existing, outdoor, incumbents. For instance, the unlicensed but shared 6 GHz band (5.925 - 7.125 GHz) enables sharing by imposing lower transmit power for indoor unlicensed devices and a spectrum coordination requirement for outdoor devices. Further, indoor devices are prohibited from using battery power, external antennas, and weatherization to prevent outdoor operations. As these rules may be circumvented, we propose a robust indoor/outdoor classification method by leveraging the fact that the radio-frequency environment faced by a device are quite different indoors and outdoors. We first collect signal strength data from all cellular and Wi-Fi bands that can be received by a smartphone in various environments (indoor interior, indoor near windows, and outdoors), along with GPS accuracy, and then evaluate three machine learning (ML) methods: deep neural network (DNN), decision tree, and random forest to perform classification into these three categories. Our results indicate that the DNN model performs the best, particularly in minimizing the most important classification error, that of classifying outdoor devices as indoor interior devices.