8 July 2015 in Journal of Zhejiang University-SCIENCE A
Wind tunnel experiments at a model scale have been carried out to investigate the flow characteristics in the near wake of a wind turbine. Time resolved particle image velocimetry (TRPIV) measurements are applied to visualize the wind turbine wake flow. The instantaneous vorticity, average velocities, turbulence kinetic energy, and Reynolds stresses in the near wake have been measured when the wind turbine is operated at tip speed ratios (TSRs) in the range of 3–5. It was found that wind turbine near the wake flow field can be divided into a velocity increased region, a velocity unchanged region, and a velocity deficit region in the radial direction, and the axial average velocities at different TSRs in the wake reach inflow velocity almost at the same radial location. The rotor wake turbulent kinetic energy appears in two peaks at approximately 0.3R and 0.9R regions in the radial direction. The Reynolds shear stress is less than the Reynolds normal stresses, the axial Reynolds normal stress is larger than the Reynolds shear stress and radial Reynolds normal stress in the blade root region, while the radial Reynolds normal stress is larger than the Reynolds shear stress and axial Reynolds normal stress in the blade tip region. The experimental data may also serve as a benchmark for validation of relevant computational fluid dynamics (CFD) models.
1 January 2025 in Journal of Renewable and Sustainable Energy
Based on the traditional sharp trailing edge airfoil, on the research that the rational change of trailing edge thickness of airfoil can improve the lift-drag ratio, this paper uses the method of symmetrical thickening of the trailing edge to trailing edge thickness of the airfoils at various parts of the small horizontal axis wind turbine blades independently designed using the NACA4415 airfoil. After scaling down, the blades are fabricated for wind tunnel tests. The experiment shows that compared with the sharp trailing edge blades, in the region at the same position where x/R = 2–4, the wake expansion and the change in turbulence intensity of the blade with a trailing edge thickness of 3%c are the most significant. The expansion ratio is approximately 3.3%, and the turbulence intensity is reduced by about 3% compared to that of the original blade. At the position where x/R = 4, the turbulence intensity is reduced by about 2.5% compared to that of the original blade. When tip speed ratio (TSR) = 5, the rotor power of the blade with 3%c trailing edge thickness has the maximum increase, which is 7.01% compared with the original blade. The blade with changed trailing edge thickness has more significant power generation efficiency when the TSR is high and can adapt to harsher environments in wind farms.