19 December 2025 in Journal of Crystal Growth
29 January 2026 in engrXiv
This study uncovers the interplay between phase-induced interfaces and mechanochemical activation on the alkaline oxygen evolution reaction (OER) performance of tungsten oxide (WO3). Commercial polycrystalline (WO3-C) and synthesized single-crystal (WO3-S) monoclinic WO3 precursors were subjected to identical mechanochemical processing by planetary ball milling (PBM). Ball-milled single-crystal WO3 (WO3-S-PBM) yielded nanocrystalline powders (~20-50 nm) with enriched γ-monoclinic phase content (40% vs. 28% for WO3-C-PBM), suppressed surface W⁵⁺ defects, and enhanced hydroxylation. Using Hansen solubility parameters, powders were formulated into stable inks to fabricate OER anodes on Ni substrates. Multi-technique characterization revealed that anodes made from WO3-S-PBM resulted in continuous, crack-free coatings with uniform nanoscale roughness (5-fold lower variability) and enhanced wettability (initial contact angle 40° vs. 82°), establishing dense WO3/Ni interfacial contacts that were not achievable for WO3-C-PBM. Electrochemically, WO3-S-PBM/Ni delivered a current density of 84.8 mA cm-2 at 1.65 V vs. RHE with 328 mV overpotential a 3-fold enhancement over WO3-C-PBM (375 mV) despite nearly identical active surface areas (<3% difference). Cyclic voltammetry demonstrates that this superior performance arises from phase-selective stabilization of the intrinsically more active γ-NiOOH (1.45 V vs. RHE) at uniform WO3-S-PBM interfaces, whereas heterogeneous WO3-C-PBM coatings permit mixed β/γ phase coexistence. These results establish the interplay of extrinsic mechanochemical activation with intrinsic phase and crystallinity as a critical, previously overlooked design parameter governing interfacial phase selectivity and OER activity in metal-oxide composite electrocatalysts.
15 May 2026 in Journal of Crystal Growth
20 March 2026 in SSRN Electronic Journal
This study uncovers the effect of the interplay between phase-induced interfaces and mechanochemical activation on the alkaline oxygen evolution reaction (OER) performance of tungsten oxide (WO3). Commercial polycrystalline (WO3-C) and synthesized single-crystal (WO3-S) monoclinic WO3 solid precursors were subjected to identical mechanochemical processing by planetary ball milling (PBM). Ball-milled single-crystal WO3 (WO3-S-PBM) yielded nanocrystalline powders (~20-50 nm) with enriched γ-monoclinic phase content (40% vs. 28% for WO3-C-PBM), suppressed surface W5+ defects, and enhanced hydroxylation. Using Hansen solubility parameters, powders were formulated into stable inks to fabricate OER anodes on Ni substrates. Multi-technique characterization revealed that WO3-S-PBM anodes formed continuous, crack-free coatings with uniform nanoscale roughness and improved wettability (contact angle 40° vs. 82°), enabling dense WO3/Ni interfacial contact not achieved with WO3-C-PBM. Electrochemically, WO3-S-PBM/Ni delivered 84.8 mA cm−2 at 1.65 V vs. RHE with lower overpotential of 328 mV compared to WO3-C-PBM/Ni (375 mV), despite similar surface areas. Cyclic voltammetry shows this enhanced performance originates from stabilization of the more active γ-NiOOH phase (1.45 V vs. RHE) at uniform WO3-S-PBM interfaces, whereas WO3-C-PBM coatings promote mixed β/γ phase coexistence. These findings demonstrate mechanochemical activation and crystallinity govern interfacial phase selectivity and OER activity in metal-oxide electrocatalysts.