National & Local Joint Engineering Laboratory for Synthesis Technology of High-Performance Polymer, Key Laboratory of High-Performance Plastics, Ministry of Education, College of Chemistry, Jilin University, Qianjin Street 2699, Changchun 130012, China
Auto-generated profile, based on publicly available information
Hongyan Yao
National & Local Joint Engineering Laboratory for Synthesis Technology of High-Performance Polymer, Key Laboratory of High-Performance Plastics, Ministry of Education, College of Chemistry, Jilin University, Qianjin Street 2699, Changchun 130012, China
A novel diamine monomer bearing double hydrophobic cross-linkable tetrafluorostyrol side-groups has been successfully synthesized. Based on this monomer along with 4,4′-diaminodiphenyl ether-2,2′-disulfonic acid (ODADS) and 1,4,5,8-naphthalenetetracarboxylic dianhydride (NTDA), a series of cross-linked highly sulfonated co-polyimide (CSPIy-6FATFVPx) membranes with IEC values ranging from 2.07 to 2.41 meq g−1 were prepared via a high temperature poly-condensation, followed by a thermal cross-linking reaction. The SPI were synthesized by high temperature polymerization. The CSPI membranes were obtained from the SPI membrane by thermal crosslinking reation. The polymerization and crosslinking reation were not performed in one pot. The CSPIy-6FATFVPx membranes showed significantly excellent performance, especially the high proton conductivity (0.153–0.210 S cm−1 at 80 °C), low water uptake (54.1%–87.1% at 80 °C) and swelling ratio (15.5%–23.0% at 80 °C). Furthermore, the CSPIy-6FATFVPx membranes also exhibited outstanding thermal stability (5% weight loss when the temperature exceed 320 °C), excellent hydrolytic stability and mechanical properties. The results indicate that CSPIy-6FATFVPx are promising candidates as proton exchange membranes in fuel cell technology.
Based on a dianhydride monomer 2,5-bis(3,4-dicarboxyphenoxy)-4′-phenylethynyl biphenyl (PEPHQDA) containing a crosslinkable phenylethynyl pendant group, microporous polyimide networks (HBPI-CRs) were prepared through a two-step pathway combining polymerization and crosslinking reactions. Specifically microporous features such as surface morphology, microporous structure and uniform nanometer-sized pore channels were introduced to the polyimide networks through this two-step pathway. The HBPI-CR networks exhibited a BET surface area (385–497 m2 g−1) as well as a comparable CO2 uptake (1.65–2.04 mmol g−1 at 273 K and 1 bar) and enthalpy of adsorption (28.6–30.0 kJ mol−1) to that of other microporous polyimides derived from rigid tri-dimensional monomers.
28 September 2022 in Macromolecular Rapid Communications