Experiments on heating without stress after a preliminary plastic deformation of bcc metals (armco Fe, Mo) have been carried out. The temperatures of deformation and heating were varied in wide...
20 April 2011 in Physics of Metals and Metallography
Self-blocking of dislocations belonging to the cube plane has been detected in the intermetallic compound Ni3Ge. The nature of cubic slip has been clarified. The experiments included deformation at a...
1 March 2017 in Russian Journal of Non-Ferrous Metals
A new cold deformation method of cast magnesium is proposed. The method includes the implementation of the upsetting technique under lateral pressure. The billet is initially placed into a jacket made of ductile metal and then into a container. The billet is affected with a puncheon placed into the container with a gap. Under the press force, the jacket metal flows into the gap and forms the pressure. This results in an increase in the level of compressing stresses, which increases the ductility of magnesium. Deformation tests of cast magnesium samples showed that the relative reduction without destruction can be increased from 12‒18 to 60–70%. Such an increase in ductility makes it possible to produce deformed magnesium billets without heating. A simplified removal procedure of the samples from jackets after the completion of deformation is foreseen. It is revealed that the process can be performed at average upsetting pressures of 820–830 MPa, which is acceptable for modern tool materials.
27 May 2008 in Physics of Metals and Metallography
As a result of experiments which include plastic deformation and subsequent heating without stress, self-blocking of dislocations in TiAl has been revealed. The transformations of glissile...
31 October 2008 in Physics of Metals and Metallography
The formation of the structure and properties of Cu-Pd alloys during the Al- B2 phase transformations is discussed. The evolution of the microstructure is analyzed, and the temperature dependences of...