15 October 2012 in Journal of Applied Physics
Nanoparticles of CoFe2O4 and CoIn0.15Fe1.85O4 ferrites were prepared by citrate gel route and characterized to understand their structural, electrical, and magnetic properties. X-ray diffraction and Raman spectroscopy were used to confirm the formation of single phase cubic spinel structure. The average grain sizes from the Scherrer formula were below 50 nm. Microstructural features were obtained by scanning electron microscope and compositional analysis by energy dispersive spectroscopy. The hysteresis curve shows enhancement in coercivity while reduction in saturation magnetization with the substitution of In3+ ions. Enhancement of coercivity is attributed to the transition from multidomain to single domain nature. Electrical properties, such as dc resistivity as a function of temperature and ac conductivity as a function of frequency and temperature were studied for both the samples. The activation energy derived from the Arrhenius equation was found to increase in the doped sample. The dielectric constant (ε′) and dielectric loss (tan δ) are also studied as a function of frequency and temperature. The variation of dielectric properties ε′, tan δ, and ac conductivity (σac) with frequency reveals that the dispersion is due to Maxwell–Wagner type of interfacial polarization in general and the hopping of charge between Fe2+ and Fe3+ as well as between Co2+ and Co3+ ions at B-sites. Magnetization and electrical property study showed its dominant dependence on the grain size.
1 April 2013 in Optical Materials
21 June 2021 in Applied Physics Letters
Damping-like torque (DLT) arising from the spin Hall effect (SHE) in heavy metals and their alloys has been widely explored for applications in spin–orbit torque MRAM, auto-oscillations, spin waves, and domain wall motion. In conventional materials, the DLT efficiency is limited by intrinsic properties, while attaining strong spin–orbit coupling and higher spin-charge interconversion, with no compromise to electric properties, is the need of the hour. In this Letter, we report more than 3.5 times increase in DLT efficiency, θDL, of modified Pt-oxide by employing a better approach of low energy 20 keV O+ ion implantation. The highest fluence of O+ implantation (1 1017 ions cm−2) in Pt enhanced the DLT efficiency from 0.064 to 0.230 and improved the spin transmission for a smaller trade-off in the longitudinal resistivity ( to from 55.4 to 159.5 μΩ cm, respectively. The transverse spin Hall resistivity, , is found to be proportional to the square of the longitudinal resistivity, i.e., , implying that the enhanced SHE in O-implanted Pt is due to a side-jumping mechanism. Further, no break in the twofold as well as mirror symmetry of torques from the O-implanted Pt allows the use of spin-torque ferromagnetic resonance-based line shape analysis to quantify such torques.
1 February 2023 in Physical Review B
The rapidly evolving utilization of spin Hall effect (SHE) arising from spin-orbit coupling in transition metals and alloys has made giant strides in the development of designing low-power, robust, and nonvolatile magnetic memory. Recent studies, on incorporating nonmetallic lighter elements such as oxygen, nitrogen, and sulfur into transition metals, have shown an enhancement in dampinglike torque efficiency due to the modified SHE, but the mechanism behind this enhancement is not clear. In this paper, we study at different temperatures (100–293 K) to disentangle the intrinsic and extrinsic side-jump scattering induced SHE in N-implanted Pt. We observe a crossover of intrinsic to extrinsic side-jump mechanism as the implantation dose increases from to . A sudden decrease in the intrinsic spin Hall conductivity is counterbalanced by the increase in the extrinsic side-jump induced SHE efficiency. These results conclude that studying as a function of implantation dose, and as a function of temperature, is important to understand the physical mechanism contributing to SHE.
1 June 2012 in Journal of Alloys and Compounds
1 June 2013 in Journal of Alloys and Compounds