30 December 2022 in Radiotekhnika
The current trend towards increasing the efficiency of UAV use is the transition from their single use to group use. In accordance with this, when building a complex integrated system for detecting and monitoring UAVs, including various information channels, it is advisable to take into account the features of the system functioning associated with the detection of groups of UAVs. The article discusses the information, energy and search capabilities of individual detection tools being a part of the integrated UAV surveillance system in order to build an effective algorithm for joint processing of incoming input signals, taking into account various capabilities of individual channels (in terms of range, recognition, etc.). An optimal algorithm for detecting groups of UAVs in a complex integrated system combining detection decisions made in private channels is synthesized. According to the synthesized algorithm, complex processing consists in summing up the solutions of individual detectors with some weights determined by the quality of the decisions made in the channels. The quality of solutions, in turn, depends on the technical means used in the channels and the conditions of observation. A sequence for solving a set of interrelated tasks in a complex integrated UAV surveillance system as the group target approaches the protected object is proposed. The sequence includes the following operations: identification of a group target (energy detection); estimation of coordinates of a group of objects; spatial resolution and determination of the number of vehicles in a group; recognition (type determination) of each individual device; assessment of the coordinates of each aircraft separately; determination of the composition of the group (homogeneous, heterogeneous); determination of the specialization of the group and revealing the nature of its tasks.
28 September 2022 in Radiotekhnika
Currently, classical means of detecting objects do not provide the necessary efficiency for detecting small UAVs, and acoustic location among the known methods for their observation is the most cost-effective solution. The article analyzes the well-known methods of direction finding of acoustic signals in order to select algorithms for processing UAV signals. Obtaining qualitative indicators of the analyzed algorithms was carried out by the method of statistical computer modeling in the Matlab environment. Based on the simulation results, it is shown that classical methods are the most stable under conditions of low signal-to-noise ratios. The GCC-PHAT direction finding algorithm, based on determining the difference in the time of arrival of a signal at spaced points, is computationally economical and simple enough to determine the direction to the UAV, but it is not capable of distinguishing more than one radiation source within the diagram orientation. Beamforming methods are also relatively easy to implement and computationally efficient, and are more robust at low signal-to-noise ratios. The SRP-NAM algorithm has a greater accuracy in determining angles than SRP-PHAT, so it can be an adequate replacement for the SRP-PHAT algorithm. High-resolution methods provide better directional resolution than classical methods, which, in the case of a limited microphone array aperture, is a positive factor in the design of an UAV direction finding station. High resolution methods were considered: non-coherent MUSIC, non-coherent normalized MUSIC and TOPS method. It is shown that incoherent MUSIC gives poor results in distinguishing close UAV signals, since unequal estimates of the entire frequency range are concentrated during bearing formation. The incoherent normalized MUSIC algorithm is able to efficiently use the entire frequency range of the UAV acoustic signal. The TOPS algorithm is inferior to the incoherent normalized MUSIC algorithm, and on the other hand, it does not require a priori estimates of the number of radiation sources.
29 September 2023 in Radiotekhnika
Small UAVs are often used in a group, since their signals are highly correlated, their resolution is reduced when using non-coherent processing. The article analyzes the well-known methods of coherent processing of acoustic signals in order to increase the resolution in the direction finding of signals with a high degree of correlation. Obtaining qualitative indicators of the analyzed algorithms was carried out by the method of statistical computer modeling in the Matlab environment. Based on the simulation results, it is shown that coherent signal processing methods are the most stable in conditions of low signal-to-noise ratios, while non-coherent ones show the best results in the region of high signal-to-noise ratio, while coherent algorithms can potentially distinguish more targets. the WAVES coherent algorithm performs better in the high signal-to-noise ratio region, but loses to the CSSM algorithm in the low signal-to-noise region. To increase the efficiency of coherent processing of multipath signals, it applies spatial filtering of the inputsignal. Малі БПЛА часто застосовуються в групі, оскільки їх сигнали мають високий рівень кореляції, їх роздільна здатність при використанні некогерентної обробки знижується. Aналізуються відомі методи когерентної обробки акустичних сигналів з метою збільшення роздільної здатності при пеленгації сигналів високого ступеня кореляції. Отримання якісних показників аналізованих алгоритмів здійснювалося методом статистичного комп'ютерного моделювання в середовище Matlab. За результатами моделювання показано, що когерентні методи обробки сигналу є найбільш стійкими в умовах низьких відносин сигнал-шум, у той час як некогерентні показують кращі результати в галузі високого відношення сигнал-шум, при цьому когерентні алгоритми можуть потенційно розрізнити більше цілей. Когерентний алгоритм WAVES показує найкращі результати в області високого відношення сигнал шум, але в області низького відношення сигнал шум програє алгоритму CSSM. Для збільшення ефективності когерентної обробки багатопроменевих сигналів застосовує просторова фільтрація вхідного сигналу.
24 December 2021 in Radiotekhnika
Currently, unmanned aerial vehicles (UAVs) provide a wide range of useful tasks for humanity, but, on the other hand, they pose a serious threat in economic, military and other areas of human activity. Difficulties in observing UAVs using modern technical means, as well as their relatively low cost, lead to an expansion of the scope of UAVs based illegal actions. Therefore, the protection of various objects against UAVs is a serious scientific and technical task of today. Since the possibilities of the known methods of UAV detection are different, the joint use of systems of different types is realized in practice nowadays, in order to increase the informativeness of the obtained data by their joint (complex) processing. The number of publications in this field is constantly increasing, and considerable attention is paid to integrated systems built on the basis of various physical sensors. However, the efficiency of multi-sensor systems with integrated processing of the output signals of the channels in practice remains insufficient. This article is devoted to the study of methods for the synthesis of new, more efficient algorithms for complexing radar, acoustic, optical and infrared information channels of integrated UAV detection and recognition systems, which are performed from the standpoint of statistical theory of radio system optimization. This approach allows synthesizing the optimal (according to the selected quality criterion) complex information processing system, which ensures obtaining the maximum amount of information from the vector process observed at the inputs of information channels. There shown the possibility of constructing an optimal UAV detector with the use of the late strategy of combining information at the level of decisions made in individual channels of the system.