1 July 2021 in IEEE Access
For the parallel parking problem in narrow space, this paper proposes a trajectory tracking control method with a novel trajectory planning layer for autonomous parallel parking based on a numerical optimization algorithm and model predictive control. In the trajectory planning layer, the vehicle kinematics model suitable for the low-velocity parking scene is established. Considering the vehicle physical constraints, boundary condition constraints, and obstacle avoidance constraints during the parking process, the parking trajectory planning task is described as an optimal control problem, further transformed into a nonlinear programming problem by Gauss pseudo-spectral method. Taking the shortest parking completion time as the optimization objective function, the parking trajectories of the large, medium and small parking spaces are obtained, respectively. A parking trajectory tracking controller based on the model predictive control algorithm is designed in the trajectory tracking control layer. The linear error model is used as the prediction model, and the quadratic programming is adopted as the rolling optimization algorithm in the tracking controller. The velocity and front-wheel swing angle are obtained as control signals for parking trajectory tracking. Through CarSim and Simulink's co-simulation, the feasibility and effectiveness of the proposed parallel parking trajectory planning and tracking control method are verified. The co-simulation results show that the maximum tracking errors of horizontal and longitudinal positions are less than 0.15m. The maximum tracking errors of heading angle are less than 2° under three different parking spaces. Real vehicle tests are carried out to verify the effectiveness of the proposed hierarchical control method. The test results show that the vehicle can park in the parking space safely, quickly and accurately when the actual parking space is detected. The proposed method can plan the parking trajectory with the constraints and the shortest time and control the vehicle to complete the parking operation accurately along the planned trajectory.
19 November 2018 in Advances in Mechanical Engineering
For a great influence on the fuel economy and exhaust, driving cycle recognition is becoming more and more widely used in hybrid electric vehicles. The purpose of this study is to develop a method to identify the type of driving cycle in real time with better accuracy and apply the driving cycle recognition to minimize the fuel consumption with dynamic equivalent fuel consumption minimization strategy. The support vector machine optimized by the particle swarm algorithm is created for building driving cycle recognition model. Furthermore,the influence of the two parameters of window width and window moving velocity on the accuracy is also analyzed in online application. A case study of driving cycle in a medium-sized city is introduced based on collecting four typical driving cycle data in real vehicle test. A series of characteristic parameters are defined and principal component analysis is used for data processing. Finally, the driving cycle recognition model is used for equivalent fuel consumption minimization strategy with a parallel hybrid electric vehicle. Simulation results show that the fuel economy can improve by 9.914% based on optimized support vector machine, and the fluctuations of battery state of charge are more stable so that system efficiency and batter life are substantially improved.
8 November 2018 in IFAC-PapersOnLine
NEDC is widely used in China, however, it is not really appropriate for the current Chinese road conditions. In order to construct the driving cycle of Hefei, this paper take the urban roads in Hefei as the research object, using principal component analysis (PCA) to reduce the dimensionality of the kinematic parameters and k-means clustering method to classify kinematics segments. According to the length of time and the correlation of each class, some kinematic segments were selected to form the synthetic driving cycle. Through the error analysis, it can be seen that the synthetic driving cycle represents the real-world driving well, which establishes a solid foundation for accurate performance evaluation of passenger vehicles in Hefei.
1 January 2014 in Advances in Mechanical Engineering
In this article, an approach of driving cycle generation for battery electric vehicle is proposed based on genetic ant colony algorithm. The real-world traffic information is utilized to build up a local driving cycle database, in which definitions of the short trip and kinematic characteristic parameters are discussed to describe the driving cycle. A method of principal component analysis is taken as a preprocessor for reducing the dimension of driving cycle data. And then, genetic ant colony algorithm is used to classify the type of short trips and generate the driving cycle. The experimental results on board indicate that, compared with the Economic Commission for Europe driving cycle, the error of driving range and characteristic parameters tested by genetic ant colony driving cycle are reduced by 18.1% and 18.3%, respectively. Therefore, genetic ant colony driving cycle is a good candidate to test driving range of battery electric vehicle.
24 September 2020 in Applied Optics
The quantitative analyses of pH value in soil have been performed using laser-induced breakdown spectroscopy (LIBS) technology. The aim of this work was to obtain a reliable and accurate method for rapid detection of pH value in soil. Seventy-four samples were used as a calibration set, and 24 samples were used as a prediction set. To eliminate the matrix effect, the multivariate models of partial least-squares regression (PLSR) and least-squares support vector regression (LS-SVR) were used to construct the models. The intensities of nine emission lines of C, Ca, Na, O, H, Mg, Al, and Fe elements were used to fit the models. For the PLSR model, the correlation coefficient was 0.897 and 0.906 for the calibration and prediction set, respectively. Furthermore, the analysis accuracy was improved effectively by the LS-SVR method, and the correlation coefficients for calibration and prediction set were improved to 0.991 and 0.987. The prediction mean absolute error was pH 0.1 units, and the root mean square error of the prediction was only 0.079. The results indicated that the LIBS technique coupled with LS-SVR could be a reliable and accurate method for determining pH value in soil.
20 August 2023 in Advances in Mechanical Engineering
For the autonomous parking problem of the tractor-semitrailer vehicle, a piecewise Gauss pseudospectral method is proposed as a trajectory planning scheme in this paper. Firstly, the trajectory planning problem is transformed into an optimal control problem by establishing a vehicle kinematics model for the low-velocity scene, the dynamic constraints including the physical constraints, the collision avoidance constraints, and the endpoint constraints. The optimal control problem are discretized into a nonlinear programming problem by piecewise Gauss pseudospectral method according to the movement area during parking process. The shortest time to complete parking is taken as the objective function. The Gauss pseudospectral method is further adopted to solve the nonlinear programming problem in the two parking stages. Three parallel parking conditions with different lengths of parking spaces and three vertical parking conditions with different widths of parking spaces are set for simulation verification based on Matlab/Simulink. The simulation results show that the proposed method can uniformly and effectively solve the trajectory planning problem of the tractor-semitrailer vehicle. Compared with the traditional pseudospectral method, a shorter parking time and a significantly higher convergence rate can be got with the method, which further indicates that the proposed method has good effectiveness and robustness.