24 April 2018 in IEEE Transactions on Industrial Electronics
For effective operation of Dynamic Voltage Restorer (DVR) control strategy plays significant role. This paper presents enhanced control strategy for DVR using dual role Cascaded Delay Signal Cancellation (CDSC) based Dual Vector Control (DVC) under unbalanced and distorted grid conditions. Based on the numerical analysis it is found that CDSC prefilter is promising solution when grid voltage is distorted by symmetric, asymmetric harmonics and unbalanced sag. Mainly, CDSC prefilter extracts Instantaneous Symmetrical Components (ISC) of the grid voltage required for voltage sags detection and generation of fundamental component of reference voltage for the DVR. A CDSC based DVC algorithm with inductor current and capacitor voltage feedback is implemented in synchronous reference frame, which tracks the fundamental DVR reference voltages. An extractor based on modified CDSC strategy is designed to extract harmonics from load voltage during distorted grid conditions. These extracted harmonic components (non-fundamental) are added in phase opposition with fundamental component and fed to PWM block to generate reference voltages. Experimental studies are conducted on scaled down (100 V, 0.5kVA) laboratory prototype DVR to verify the effectiveness of the proposed control algorithm under unbalanced and distorted grid conditions.
6 November 2020 in IEEE Journal of Emerging and Selected Topics in Industrial Electronics
Grid integration of distributed energy resources (DER) has become a technical challenge in the distribution network operation due to the intermittent nature of renewable energy sources and their impact on grid voltage stability. Thus, a Dynamic Voltage Restorer (DVR) is installed in the distribution network system to reduce such grid voltage impact on sensitive loads. In this paper, a Pseudo Derivative Feedback (PDF) based voltage controller is implemented for effective operation of DVR under voltage disturbances. Response of DVR primarily depends upon its controller action. This paper address the issues in conventional P and PI multiloop controller with and without feedforward path then proposes PDF control strategy for DVR. Using proposed controller, dynamic performance of DVR is improved. The efficacy of proposed controller is illustrated by comparative study with conventional P and PI controller using time response and relative stability analysis. Finally, PSCAD simulation studies for a 10 kV medium voltage DVR and experimental results using a low voltage laboratory prototype DVR are presented to prove robustness of proposed controller for DVR under symmetric and asymmetric voltage sags.