22 July 2013 in Geoscientific Model Development
Tropospheric trace gas and aerosol pollutants have adverse effects on health, environment and climate. In order to quantify and mitigate such effects, a wide range of processes leading to the formation and transport of pollutants must be considered, understood and represented in numerical models. Regional scale pollution episodes result from the combination of several factors: high emissions (from anthropogenic or natural sources), stagnant meteorological conditions, kinetics and efficiency of the chemistry and the deposition. All these processes are highly variable in time and space, and their relative contribution to the pollutants budgets can be quantified with chemistry-transport models. The CHIMERE chemistry-transport model is dedicated to regional atmospheric pollution event studies. Since it has now reached a certain level a maturity, the new stable version, CHIMERE 2013, is described to provide a reference model paper. The successive developments of the model are reviewed on the basis of published investigations that are referenced in order to discuss the scientific choices and to provide an overview of the main results.
28 June 2017 in Geoscientific Model Development
CHIMERE is a chemistry-transport model designed for regional atmospheric composition. It can be used at a variety of scales from local to continental domains. However, due to the model design and its historical use as a regional model, major limitations had remained, hampering its use at hemispheric scale, due to the coordinate system used for transport as well as to missing processes that are important in regions outside Europe. Most of these limitations have been removed in the CHIMERE-2017 version, allowing its use in any region of the world and at any scale, from the scale of a single urban area up to hemispheric scale, with or without polar regions included. Other important improvements have been made in the treatment of the physical processes affecting aerosols and the emissions of mineral dust. From a computational point of view, the parallelization strategy of the model has also been updated in order to improve model numerical performance and reduce the code complexity. The present article describes all these changes. Statistical scores for a model simulation over continental Europe are presented, and a simulation of the circumpolar transport of volcanic ash plume from the Puyehue volcanic eruption in June 2011 in Chile provides a test case for the new model version at hemispheric scale.
1 November 2008 in Journal of Atmospheric and Oceanic Technology
A persistent challenge for small-scale air quality modeling is the assessment of health impact and population exposure studies. Despite progress in computation and in the quality of model input (i.e., high-resolution information on land use and emission patterns), the uncertainty associated with input parameters cannot be eliminated. The aim of this paper is to study different sources of uncertainty that affect model results as the resolution increases. Mesoscale chemistry transport simulations at different resolutions are used and modeled 03 concentrations are compared with surface measurements. The case study consists of CHIMERE model simulations over the city of Paris. It is shown that the principal source of noise in model results is the resolution of the input emission fluxes. The O3 concentrations modeled with simulations forced by several horizontal resolutions of input emission data (from Δx = 48 km to Δx = 6 km) indicate that model results do not improve monotonously with resolution, but that after a certain point discrepancies become larger. Based on this result and as an alternative to the deterministic downscaling that resolves explicitly the finer scale (beyond the 1-km range), the authors propose a subgrid-scale approach that uses a statistical description of spatial scales finer than model resolution. As an example, the subgrid variability of modeled O3 concentration has been quantified, when modeled dry deposition processes occur over subgrid surfaces (land use fractions). The implementation of this modified calculation gives access to subgrid fluxes and subgrid surface concentrations instead of the mean values provided by the commonly used model calculation.
1 May 2015 in Science of The Total Environment
14 July 2015 in Atmospheric Chemistry and Physics
While previous research helped to identify and prioritize the sources of error in air-quality modeling due to anthropogenic emissions and spatial scale effects, our knowledge is limited on how these uncertainties affect climate-forced air-quality assessments. Using as reference a 10-year model simulation over the greater Paris (France) area at 4 km resolution and anthropogenic emissions from a 1 km resolution bottom-up inventory, through several tests we estimate the sensitivity of modeled ozone and PM2.5 concentrations to different potentially influential factors with a particular interest over the urban areas. These factors include the model horizontal and vertical resolution, the meteorological input from a climate model and its resolution, the use of a top-down emission inventory, the resolution of the emissions input and the post-processing coefficients used to derive the temporal, vertical and chemical split of emissions. We show that urban ozone displays moderate sensitivity to the resolution of emissions (~ 8 %), the post-processing method (6.5 %) and the horizontal resolution of the air-quality model (~ 5 %), while annual PM2.5 levels are particularly sensitive to changes in their primary emissions (~ 32 %) and the resolution of the emission inventory (~ 24 %). The air-quality model horizontal and vertical resolution have little effect on model predictions for the specific study domain. In the case of modeled ozone concentrations, the implementation of refined input data results in a consistent decrease (from 2.5 up to 8.3 %), mainly due to inhibition of the titration rate by nitrogen oxides. Such consistency is not observed for PM2.5. In contrast this consistency is not observed for PM2.5. In addition we use the results of these sensitivities to explain and quantify the discrepancy between a coarse (~ 50 km) and a fine (4 km) resolution simulation over the urban area. We show that the ozone bias of the coarse run (+9 ppb) is reduced by ~ 40 % by adopting a higher resolution emission inventory, by 25 % by using a post-processing technique based on the local inventory (same improvement is obtained by increasing model horizontal resolution) and by 10 % by adopting the annual emission totals of the local inventory. The bias of PM2.5 concentrations follows a more complex pattern, with the positive values associated with the coarse run (+3.6 μg m−3), increasing or decreasing depending on the type of the refinement. We conclude that in the case of fine particles, the coarse simulation cannot selectively incorporate local-scale features in order to reduce its error.
17 July 2014 in Atmospheric Chemistry and Physics
Ozone and PM2.5 concentrations over the city of Paris are modeled with the CHIMERE air-quality model at 4 km × 4 km horizontal resolution for two future emission scenarios. A high-resolution (1 km × 1 km) emission projection until 2020 for the greater Paris region is developed by local experts (AIRPARIF) and is further extended to year 2050 based on regional-scale emission projections developed by the Global Energy Assessment. Model evaluation is performed based on a 10-year control simulation. Ozone is in very good agreement with measurements while PM2.5 is underestimated by 20% over the urban area mainly due to a large wet bias in wintertime precipitation. A significant increase of maximum ozone relative to present-day levels over Paris is modeled under the "business-as-usual" scenario (+7 ppb) while a more optimistic "mitigation" scenario leads to a moderate ozone decrease (−3.5 ppb) in year 2050. These results are substantially different to previous regional-scale projections where 2050 ozone is found to decrease under both future scenarios. A sensitivity analysis showed that this difference is due to the fact that ozone formation over Paris at the current urban-scale study is driven by volatile organic compound (VOC)-limited chemistry, whereas at the regional-scale ozone formation occurs under NOx-sensitive conditions. This explains why the sharp NOx reductions implemented in the future scenarios have a different effect on ozone projections at different scales. In rural areas, projections at both scales yield similar results showing that the longer timescale processes of emission transport and ozone formation are less sensitive to model resolution. PM2.5 concentrations decrease by 78% and 89% under business-as-usual and mitigation scenarios, respectively, compared to the present-day period. The reduction is much more prominent over the urban part of the domain due to the effective reductions of road transport and residential emissions resulting in the smoothing of the large urban increment modeled in the control simulation.