1 June 2025 in Smart Materials and Structures
This paper introduces a novel piezoelectric actuator (PEA)-driven two-degree-of-freedom micro/nano-positioning stage for high-precision adjustments in small-space situations. To enhance stage compactness and dynamic performance while significantly reducing parasitic motions, the composite leaf-type double parallelogram mechanism and the leaf-type double parallelogram mechanism are presented for implementation in guided and decoupled mechanisms, respectively. The composite bridge arm structure and compact double parallelogram design enable the amplification mechanism to provide significant lateral rigidity and safeguard the PEA.The orthogonal arrangement of the composite bridge type amplification mechanism and the dual parallelogram decoupling guiding mechanism are integrated to achieve full decoupling of the stage at both the input and output ends. The compliance matrix method and Lagrange’s equation were employed to establish mathematical analytical models of the static and dynamic characteristics, which were subsequently validated through finite element analysis. The stage’s static and dynamic performances were thoroughly assessed through experiments. The closed-loop control of the PEA utilizing integral strain gauges effectively eliminates the nonlinear hysteresis issue on the stage and exhibits proficient trajectory tracking capability. The experimental findings indicate that the motion range of the precision positioning stage is 51.71 × 49.56 µm2, the output coupling displacement error is under 1%, the displacement resolution is 12 nm, and the natural frequencies of the X-axis and Y-axis are 429 Hz and 438 Hz, respectively.
15 October 2024 in Smart Materials and Structures
This research presents a novel piezoelectric stick–slip actuator design that capable of achieving higher speeds and handling heavier loads. This addresses the requirement for improved performance in the precision engineering industry. The symmetrical configuration of the pentagonal displacement amplification flexible hinge structure produces the transverse motion. The pentagon’s deformable range is sufficiently broad to amplify the piezoelectric stack’s output displacement and convert it into the desired transverse output displacement. To enhance the load capacity of the piezoelectric stick–slip actuator, one can raise the coupling displacement of the driving foot output. The flexible hinge construction undergoes finite element analysis, and the simulation results meet the design assumptions. The structure has been enhanced to mitigate the potential occurrence of jamming. A prototype was constructed and subjected to rigorous testing to examine its performance. The testing results indicate that the highest attainable velocity is 15.8 mm s−1, with an impressive precision of 35.9 nm. Despite being subjected to a load of 308 g, the output displacement remains steady at 0.376 mm s−1. A comparative study of experimental and finite element simulation findings demonstrates the feasibility of the structural design.
30 August 2025 in Measurement