21 May 2026 in Aerospace Science and Technology
1 August 2025 in Physics of Fluids
This paper describes the design of a three-phase rotary arc exciter based on the principle of plasma-assisted combustion and presents analysis on the operation characteristics of it. A dual-stage swirler and a three-phase arc exciter is integrated by mounting three needle electrodes on the internal surface of Venturi tube of the swirler uniformly. In this work, the arc development process was studied and the influence of discharge on main flow field was obtained. Moreover, the species and intensity of active particles generated by discharge were analyzed. It is found that the three-phase rotary arc exciter transits between two discharge mode due to variations of air flow rates. The application of three-phase rotating gliding arc discharge reduces the turbulent intensity. Plasma discharge of the exciter could generate excited-state nitrogen molecules N2(C3Π), oxygen molecules O2(a1Δg), and other reactive particles, which has been verified to be beneficial to combustion chemical reactions.
14 July 2026 in SSRN Electronic Journal
To enhance the performance of aero-engines, a novel integrated afterburner configuration incorporating a cavity, a strut and a wall flameholder is proposed in this paper. The lean ignition characteristics were experimentally investigated under oxygen‐lean inflow with oxygen concentration of 14%-18% and equivalence ratio of Φ=0.3-0.5. Using CH/OH chemiluminescence imaging and photomultiplier tube signals, the effects of the inlet oxygen concentration and the equivalence ratio on the ignition delay time, the flame propagation mode and the steady flame structure were systematically analysed. The results show that the ignition delay time does not vary monotonically with the oxygen concentration and the equivalence ratio: the shortest mean delay (21.05 ms) occurs at 18% O₂ when Φ=0.4, whereas the highest ignition repeatability (the coefficient of variation is 6.9%) appears at 16% O₂ when Φ=0.4. Near the lean blowout limit (14% O₂ and Φ=0.3), the ignition randomness increases significantly. The transient ignition process can be divided into five stages: spark discharge, the induction period, flame kernel development, flame propagation and flame establishment. The oxygen concentration mainly influences the formation rate and the intensity of the flame kernel, while the equivalence ratio dominates the flame propagation extent and the stabilised flame coverage. The steady‐state flame images reveal that at 14% O₂ the flame is lifted and diffuse, failing to establish effective anchoring; at 16% O₂ a continuous flame sheet covering the strut, the cavity and the wall flameholder can be formed; and at 18% O₂ the combustion becomes more complete and dual flame centres appear, although local non‐uniform lift‐off also exists. In addition, a ”D‐shaped void region” was observed downstream of the strut; its area expands with increasing equivalence ratio and it migrates upward along the strut as the oxygen concentration increases. This study reveals the coupled flame stabilisation mechanism based on three types of flameholders and provides an experimental basis for the engineering design and ignition strategy optimisation of integrated afterburners.
22 September 2026 in SSRN Electronic Journal
The ignition and steady combustion characteristics of an integrated afterburner featuring a combined cavity-strut-wall flameholder configuration were experimentally investigated under five mixing-hole openings and three bypass ratios. The ignition delay time was determined from PMT-based CH* chemiluminescence signals, while high-speed CH* imaging was used to capture the transient ignition process and the time-averaged steady flame structure. The flame front complexity was quantified by the fractal dimension of the projected flame boundary, and the post-ignition temperature rise rate was evaluated from thermocouple measurements at two axial locations. The results show that the ignition delay time exhibits a U-shaped dependence on the mixing-hole opening, with the shortest mean delay obtained for mixing-hole No. 2 at a bypass ratio of 0.5 (13.92 ms). A significant interaction between the mixing-hole opening and bypass ratio is identified: increasing the bypass ratio promotes ignition for the optimal opening but deteriorates it for an excessively large opening. Ignition speed and ignition repeatability are found to be independent performance dimensions; the lowest cycle-to-cycle variability is obtained for mixing-hole No. 3 at bypass ratios of 0.3 and 0.5, although these cases do not correspond to the shortest delays. Steady flame morphology and flame front fractal dimension correlate well with ignition stability, with the lowest fractal dimension (D=1.259) observed for the optimal ignition case and the highest values associated with the most unstable conditions. The post-ignition temperature rise rate is governed primarily by the spatial distribution of heat release rather than by the ignition delay. These findings provide direct experimental guidance for the design and optimization of mixing plates in integrated afterburners.
29 September 2026 in Aerospace Science and Technology