23 February 2023 in Nature Machine Intelligence
1 April 2022 in Science Advances
We report an artificial eardrum using an acoustic sensor based on two-dimensional MXene (Ti 3 C 2 T x ), which mimics the function of a human eardrum for realizing voice detection and recognition. Using MXene with a large interlayer distance and micropyramid polydimethylsiloxane arrays can enable a two-stage amplification of pressure and acoustic sensing. The MXene artificial eardrum shows an extremely high sensitivity of 62 kPa −1 and a very low detection limit of 0.1 Pa. Notably, benefiting from the ultrasensitive MXene eardrum, the machine-learning algorithm for real-time voice classification can be realized with high accuracy. The 280 voice signals are successfully classified for seven categories, and a high accuracy of 96.4 and 95% can be achieved by the training dataset and the test dataset, respectively. The current results indicate that the MXene artificial intelligent eardrum shows great potential for applications in wearable acoustical health care devices.
25 June 2021 in Journal of Physics D: Applied Physics
Graphene has good electrical properties, flexibility, and biocompatibility, making it an ideal material to monitor electrocardiogram (ECG) signals. However, the production cost and the feasibility of large-scale production limit the application of graphene electrodes. Here, we demonstrate a roll-to-roll (R2R) method to transfer graphene grown by open-R2R chemical vapor deposition onto an ethylene vinyl acetate/polyethylene terephthalate (EVA/PET) substrate to make non-disposable ECG electrodes. This method can produce a continuous graphene/EVA/PET film with 15 cm width, and the length can reach several meters. The graphene/EVA/PET film has excellent flexibility and transparency (75.08% transmittance at 780 nm). Compared with commercial silver/silver chloride (Ag/AgCl) electrodes, R2R graphene electrodes have lower electrode–skin impedance below 1 kHz and can obtain ECG signals with similar performance to Ag/AgCl electrodes. Besides, R2R graphene electrodes have good washability. After ten times cleaning, the resistance of the R2R graphene electrode only increased by 23.2%, which was lower than that of the previous graphene electrodes. This work has great potential in the long-term and real-time healthcare monitoring system.
25 January 2022 in Journal of Physics D: Applied Physics
Graphene exhibits a variety of unprecedented innate properties and has sparked great interest in both fundamental science and regarding prospective commercial applications. To meet the ever-increasing demand for high-quality graphene sheets, an industrial-scale, reliable, environmental-friendly, low-cost production process is required. However, large-scale production high quality graphene remains elusive. Here we demonstrate a scalable mechanical cleavage method for large-quantity production of high quality large-area and few-layer graphene sheets by introducing a millstone grinding process. The average thickness of the graphene sheets is around 5 nm. This procedure is simpler than the state-of-the-art methods that allows for scalable preparation of graphene dispersion in hundreds of litres by mechanical cleavage of graphite, and the yield is 30%–40%. The size of the prepared graphene sheets can be tuneable from few micrometers to tens of micrometers by varying the dimension of raw graphite, which is larger than that produced by the state-of-the-art methods. Moreover, comparing to conductive agents, the conductivity of wafers containing graphene can be increased by one order of magnitude, suggesting a high potential of the prepared graphene sheets for the application as conductive agent in lithium battery cathodes. This allows the requirements of different sizes graphene sheets for industry applications in different fields.
22 December 2023 in ACS Applied Materials & Interfaces