By breaking through the energy density limits step-by-step, the use of lithium cobalt oxide-based Li-ion batteries (LCO-based LIBs) has led to the unprecedented success of consumer electronics over the past 27 years. Recently, strong demands for the quick renewal of the properties of electronic products every so often have resulted in smarter, larger screened, more lightweight devices with longer standby times that have pushed the energy density of LCO-based LIBs nearly to their limit. As a result, with the aim of achieving a higher energy density and lifting the upper cut-off voltage of LCO above 4.45 V (vs. Li/Li+), the development of LCO-based all-solid-state lithium batteries (ASSLBs) with a Li metal anode and LCO-based full cells with high-performance anodes have become urgent scientific and technological requirements. This review summarizes the key challenges of synthesizing LCO-based LBs with a higher energy density from the perspectives of structure and interface stability, and gives an account of effective modification strategies in view of the electrodes, liquid electrolytes, binders, separators, solid electrolytes and LCO-based full cells. The improvement mechanisms of these modification strategies and the controversy over them are also analyzed critically. Moreover, some perspectives regarding the remaining challenges for LCO-based LBs towards a higher energy density and possible future research focuses are also presented.
1 February 2017 in Journal of Materials Chemistry A
Solid electrolyte is regarded as a perfect way to enhance safety issues and boost energy density of lithium batteries. Herein, we developed a type of free-standing poly(propylene carbonate)/Li6.75La3Zr1.75Ta0.25O12 composite solid electrolyte for ambient temperature and flexible solid-state lithium batteries. The composite solid electrolyte exhibited excellent comprehensive performance in terms of high ionic conductivity (5.2 × 10−4 S cm−1) at 20 °C, a wide electrochemical window (4.6 V), high ionic transference number (0.75) and satisfactory mechanical strength (6.8 MPa). When evaluated as solid electrolyte for an ambient-temperature solid lithium battery, such a composite electrolyte delivered excellent rate capability (5C) at 20 °C. This superior performance can be comparable to a liquid electrolyte-soaked PP separator-based lithium battery at room temperature. To our knowledge, this is the best rate capability of a solid composite electrolyte for a solid lithium battery at ambient temperature. Moreover, such a composite electrolyte-based flexible LiFePO4/Li4Ti5O12 lithium ion battery delivered excellent rate capability and superior cycling stability. All these fascinating features make poly(propylene carbonate)/Li6.75La3Zr1.75Ta0.25O12 a very promising all-solid-state electrolyte for flexible solid lithium batteries. Our study makes a big step into addressing the challenges of ambient-temperature solid lithium batteries.
Interface stability between cathode and electrolyte is closely related to the interface resistance and electrochemical performance of all-solid-state lithium ion batteries (LIBs). However, the significant interface issues between cathode and all-solid-state polymer electrolyte have been researched rarely. Here, we demonstrate that severe interface decomposition reactions occur continually and deteriorate the cycling life of high voltage LiCoO2/cellulose-supported poly(ethylene oxide) (PEO)-lithium difluoro(oxalato)borate (LiDFOB)/Li battery between 2.5 and 4.45 V vs. Li/Li+. To improve the interface stability between LiCoO2 and PEO-LiDFOB electrolyte, we modify the LiCoO2 surface by a thin layer of high ionic conducting and electrochemical oxidation resistant poly(ethyl cyanoacrylate) (PECA) through in-situ polymerization method. The PECA coating layer significantly suppresses the continuous decomposition of lithium difluoro(oxalato)borate (LiDFOB) salt in PEO electrolyte. As a result, the PECA-coated LiCoO2/PEO-LiDFOB/Li battery shows decreased interface resistance and enhanced cycling stability. This work will enlighten the understanding of interface stability and enrich the modification strategy between cathode and polymer electrolyte as well as boost the further development of all-solid-state LIBs.
5 April 2018 in ACS Applied Materials & Interfaces