The effects of bamboo flour (BF) content on the dynamic rheological properties of BF-filled HDPE composites were investigated. Our findings showed that the addition of BF caused an enhancement of the non-Newtonianism of wood-plastic composites (WPCs) melt as well as the appearance of some new relaxation processes. In addition, the viscosity and modulus of the BF-filled HDPE composites showed a remarkable increase at 170 °C and 190 °C when the BF content exceeded 30%, which could be associated with the solid-like property of the WPCs at high BF loading, we propose. The present study we suggest will be useful to the formula design as well as the optimization of processing parameters for WPCs in general.
Boronic acid copolymers with a large number of functional groups were obtained via a free radical polymerization method. The corresponding composite membranes for alkaline diffusion dialysis (DD) were prepared by a crosslinking reaction between polyvinyl alcohol (PVA) and the as-obtained boronic acid copolymers. The composite membranes possessed water uptake (WR) of 122.1–194.4%, ion exchange capacities (IECs) of 0.79–1.17 mmol/g, as well as both good mechanical stability (tensile strength of 40.7–49.9 MPa and elongation at break of 52.1–121.1%) and thermal stability. The as-prepared membranes were stable in 2 M NaOH solution at 65 °C with a swelling degree and mass loss of as-prepared membranes in the range of 305–368% and 9.2–22%, respectively. A NaOH/Na2WO4 mixture was used to investigate the separation properties of as-prepared membranes via the DD process. Results indicated that the dialysis coefficients of OH− (UOH) were in the range of 0.0079–0.0150 m/h, while the separation factors (S) were in the range of 26.6–53.2. The functional groups from boronic acid copolymer and –OH from PVA were demonstrated to promote the ion transport synergistically.
Polystyrene-based wood plastic composites (WPCs) containing ammonium polyphosphate (APP) and iron (Fe) powder were prepared in this work by solution blending with the aid of an alternating magnetic field. The mechanical, electrical, thermal and fire performances of the WPCs were analyzed through mechanical testing, thermogravimetry and CONE calorimeter. The addition of Fe powder decreased the tensile strength and increased the impact strength. The APP promoted the formation of sufficient char on the material’s surface and enhanced the flame retardant properties. Furthermore, an alternating magnetic field was used to align the Fe powders. After the magnetic treatment, the electrical conductivity and thermal properties were found to increase considerably compared with those without treatment. The Agari model presented the most reasonable prediction of thermal conductivity as a function of Fe content among three classical thermal conduction models. According to the morphological observations, the iron particles in the composites tended to rearrange along the direction of the magnetic field after treatment, resulting in the enhancement of both thermal and electrical conductivities. The prepared WPCs in this study exhibited good flame retardant properties together with the acceptable mechanical properties of the composites.
Carboxyl-type boronic acid copolymers (CBACs) were synthesized by a radical polymerization method and used for the preparation of polyvinyl alcohol (PVA)-based composite membranes via a solution mixture method. The as-prepared composite membranes exhibited a water uptake (WR) of 122.6–150.0%, an ion exchange capacity (IEC) of 0.0147–0.0518 mmol g−1, and excellent mechanical (elongation at break (Eb) of 103.8–148.4%, tensile strength (TS) of 38.7–58.6 MPa) and thermal stability. The alkali resistances of the as-prepared membranes were tested by immersing the samples into 2 mol L−1 NaOH solutions at 25 °C for 60 h, and the results were encouraging: the mass loss and swelling degree of the as-prepared membranes were in the ranges of 1.9–5.9% and 222.6–241.9%, respectively. The separation performances of the as-prepared membranes were evaluated by the diffusion dialysis (DD) process with an NaOH/Na2WO4 mixture at room temperature. The results demonstrated that the dialysis coefficients of hydroxide (UOH) were in the range of 0.0147–0.0347 m h−1, and the separation factors (S) were in the range of 29.5–62.6. The introduced carboxyl groups from CBACs and the –OH groups from PVA were both deemed to play significant roles in the promotion of ion transport: the –COO− groups formed negatively charged transport channels for Na+ by electrostatic attraction, and the –OH groups promoted the transport of OH− via hydrogen bonding.