The hardening-finishing treatment of parts surface with rolling by steel cylindrical rollers produces low roughness, reduced residual compression stresses, and fine-grained structure due to plastic deformations. The deformation of metals during machining at high temperatures is characterized by a...
Мақалада металдарға жоғары легірленген материалдарды қолданудың күшейтетін технологияларына талдау жасалды. Машина бөлшектерінің металл беттеріне тозуға төзімді жабындарды жағу процестері мен технологиялары қарастырылған. Авторлар машина бөлшектерінің металл беттеріне, атап айтқанда мұнай мен газды тасымалдауға арналған құбырларға қатайтатын жабындарды жағуға арналған бірқатар құрылғыларды ұсынды. Металл ұнтақтарын газбен жалынмен бүрку құрылғысы, оның ішінде саптамасы бар термоқұрал, термоқұралда қосылған цилиндрлік саптама, жану камерасына отын мен тотықтырғышты жеткізуге арналған үш арналы коллектор, қосымша тотықтырғышты соруға арналған арналары бар сақина диффузоры, металл ұнтағын жану камерасына жеткізуге арналған құрылғы ұсынылады. Өңделетін бөлшектерді дайындамаларды жылжыту және термит ұнтағын жану камерасына беру механизмі газ ағыны цилиндрлік саптаманың көлденең қимасында көлбеу арналармен орындалады.
Structural strengthening of the surface layer material by surface plastic deformation ensures the formation of low roughness, a given depth and degree of hardening, and reduces residual compressive stresses in the surface layers. In the processes of surface plastic deformation by rolling with rollers, the microgeometric and physical-mechanical characteristics of surfaces are formed as a result of deformation of the surface layer of the part under the force of the roller on the surface being processed . In this case, the processes of plastic deformation of the surfaces of parts do not occur throughout the entire volume, but are localized in the zone immediately adjacent to the working profile of the roller in contact with the surface. This requires determining the geometric characteristics of the contact zone and establishing their dependence on the rolling modes. The purpose of this study is to study the influence of rolling modes on the geometric parameters of the surface plastic deformation zone, to determine their optimal ratios for stabilizing the contact zone of the roller and the surface of the part, obtaining a new microrelief of the surface layer of the part, ensuring high quality indicators. The patterns of changes in the plastic deformation zone have been studied.
The functional purpose of the parts is largely determined by the quality parameters of their work surfaces. Currently, surface plastic deformation is an effective method of finishing and hardening treatment, ensuring high quality of the working surfaces of the parts. This method provides a complete change in the initial roughness and forms a new regular surface profile of the part. The study was carried out within the framework of the AP 19680395 project "Study of the stress-strain state of deposited parts and development of a method for reducing their deformations in the processes of surface plastic deformation" under grant funding of the Science Committee of the Ministry of Science and Higher Education of the Republic of Kazakhstan. The article investigates the effect of finishing and hardening treatment modes by surface plastic deformation on the formation of a new microrelief of the treated surface of the part. The results of experimental studies on the influence of finishing and hardening treatment modes on the surface roughness of the part are presented. It is determined that the deformation of surface roughness irregularities is of an elasto-plastic nature and working forces during processing due to an increase in the contact area. The analysis of the results indicates an almost linear dependence of the roughness on the modes of finishing and hardening treatment. It was found that in the range of variable parameters with increasing speed, number of passes and decrease in feed, the roughness value approaches the optimal ones, which are regulated by technical conditions. Under the same processing conditions, the roughness of shafts made of 50X steel exceeds the roughness parameters of shafts made of 45 steel by 15-30%.