1 February 2019 in Separation and Purification Technology
1 May 2017 in Applied Clay Science
5 June 2017 in Water Science & Technology
MHMohammed Amine Houssaini
The adsorptive removal of Malachite Green (MG) by a novel biochar namely Cassava Rind Carbon (CRC) was studied in a batch system. Moreover, Box-Behnken Response Surface Methodology was used to optimize operating conditions of the adsorption process. Characterization was done by Thermo Gravimetric Analysis (TGA), Attenuated Total Reflectance Fourier Transform Infra-Red Spectroscopy (ATR/FTIR), Brunauer–Emmett–Teller (BET) surface area, Scanning Electron Microscopy (SEM), X-Ray Diffraction (XRD) and pH zero charge point (pHZCP). The pseudo-second-order model and Langmuir model provided the best fit for kinetic and isotherm, respectively. The maximum capacity of dye adsorbed was 932.98 mg/g at 25 °C. The influence of temperature, the mass of adsorbent and the concentration of dye was studied. The optimal amount of adsorbed MG was 1,363.58 mg/g corresponding to 50 °C, 5 mg of CRC and 150 mg/L of dye. According to the high performance exhibited by CRC in this study, Manihot esculenta Crantz waste can be used as a better and low-cost biomass for wastewater decolourization.
1 September 2017 in Sustainable Environment Research
MHMohammed Amine Houssaini
The adsorptive removal of Methylene Blue by a novel bio char namely Cassava Rind Carbon was studied in a batch system. Moreover, several experiments were performed to optimize operating conditions of the adsorption process. Thermo gravimetric analysis investigates the thermal behaviour of the raw material. The surface functional groups were identified with Attenuated Total Reflectance Fourier Transform Infra-Red spectroscopy. The carbon surface was also characterised by BET surface area, scanning electron microscopy, X-ray diffraction and zero charge point of pH. Among the three kinetic models used to calculate the adsorption rate constants, the pseudo-second order was the most accurate. The experimental isotherms were analysed and Redlich-Peterson's model provided the best fit. The maximum capacity according to Langmuir model was 565 mg g−1 at 25 °C. The thermodynamic study revealed that the adsorption is endothermic, physical and random. The temperature, the mass of adsorbent and the concentration of dye were the three factors optimized in a Box Behnken Response Surface Methodology, with an optimal amount of adsorbed MB of 771 mg g−1
1 December 2019 in Applied Clay Science
1 September 2018 in Desalination and Water Treatment
MHMohamed Amine Houssaini
+3