Renewable energy sources are developing rapidly worldwide because they are unlimited and permanent, available in every country and also eliminate foreign dependency. In this respect, accurate renewable electricity generation (REG) forecasting is essential in a country’s energy planning in relation to its development. In this study, two different data-driven methods such as adaptive neuro-fuzzy inference system (ANFIS) with fuzzy c-means (FCM) and long short-term memory (LSTM) neural network were applied to perform one-day ahead short-term REG forecasting. In addition, short-term hydropower electricity generation (HEG), geothermal electricity generation (GEG), and bioenergy electricity generation (BEG) forecasting were also made using these methods. The correlation coefficient (R), root-mean-square error (RMSE), mean absolute error (MAE), and mean absolute percentage error (MAPE) were used as evaluation criteria. The values predicted by the ANFIS-FCM and LSTM models were compared with the actual values by evaluating their errors. According to the test results obtained in terms of MAPE evaluation criteria, the best estimation model was obtained for GEG. The lowest MAPE values were found to be 7.20%, 7.46%, 1.63%, and 2.46% for REG, HEG, GEG, and BEG estimates, respectively. The results showed that both ANFIS and LSTM models presented satisfying performances in daily REG prediction, and the ANFIS and LSTM models gave almost identical results.
1 April 2020 in International Journal of Hydrogen Energy
In order to produce more efficient, sustainable-clean energy, accurate prediction of wind turbine design parameters provide to work the system efficiency at the maximum level. For this purpose, this paper appears with the aim of obtaining the optimum prediction of the turbine parameter efficiently. Firstly, the motivation to achieve an accurate wind turbine design is presented with the analysis of three different models based on artificial neural networks comparatively given for maximum energy production. It is followed by the implementation of wind turbine model and hybrid models developed by using both neural network and optimization models. In this study, the ANN-FA hybrid structure model is firstly used and also ANN coefficients are trained by FA to give a new approach in literature for wind turbine parameters’ estimation. The main contribution of this paper is that seven important wind turbine parameters are predicted. Aiming to fill the mentioned research gap, this paper outlines combined forecasting turbine design approaches and presents wind turbine performance in detail. Furthermore, the present study also points out the possible further research directions of combined techniques so as to help researchers in the field develop more effective wind turbine design according to geographical conditions.
13 January 2019 in Proceedings of the Institution of Mechanical Engineers, Part A: Journal of Power and Energy
The increasing damage caused by fossil fuels has made it a necessity for new and clean energy sources. In recent years, the use of wind energy from renewable energy sources has increased, which is a new and clean energy source. Wind energy is everywhere in nature. The wind speed changes depending on time. Thus, the wind power is unstable. In order to keep this disadvantage at a minimum level, future power estimation studies have been carried out. In these studies, different methods and algorithms are applied to estimate short and medium term in wind power. In this study, artificial neural network, particle swarm optimization and firefly algorithm (FA) as a new method are used for the first time in predicting wind power. As input data, temperature, wind speed and rotor speed the data recorded in the SCADA in wind turbines are used to predict medium-term wind speed and also wind power. Each method is compared in detail and their performances are revealed.
4 January 2024 in International Journal of Heat and Fluid Flow