Ronan Sauleau

Ronan Sauleau

Auto-generated profile, based on publicly available information

Ronan Sauleau

CNRS, Institut dElectronique et des technologies du numrique (IETR)-UMR 6164, University of Rennes, Rennes, France

Research Focus & Metrics

Academic Career Length

29Years (1998-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
27 June 2013 in IEEE Transactions on Antennas and Propagation
Verified
Journal Article
Closed access
ACAntonio Clemente
Antonio Clemente
LDLaurent Dussopt
Laurent Dussopt
RSRonan Sauleau
Ronan Sauleau
PPPatrick Potier
Patrick Potier
PPPhilippe Pouliguen
Philippe Pouliguen
A fully electronically reconfigurable 400-element transmitarray is studied numerically and experimentally in X-band. The array operates in linear polarization and consists of 20 × 20 unit-cells. A 1-bit phase resolution has been selected for the unit-cell in order to reduce the complexity of the biasing network and steering logic, the insertion loss and the overall cost of the antenna system. The unit-cell stack-up is simple and is made of four metal layers: active side, biasing lines, ground plane and passive side. Two p-i-n diodes are integrated on the active side of each cell in order to control its transmission phase. The active array contains 800 diodes in total. It demonstrates experimentally pencil beam scanning over a 140 × 80-degree window over a 15.8% fractional bandwidth, with a maximum gain of 22.7 dBi at broadside. We also show that the same antenna array can be used for beam shaping applications (flat-top beam). The experimental results presented between 8 and 12 GHz are in good agreement with the theoretical performance calculated using full-wave electromagnetic simulations and an in-house CAD tool based on analytical modeling.

29 November 2016 in IEEE Transactions on Antennas and Propagation
Verified
Journal Article
Closed access
LPLuca Di Palma
Luca Di Palma
ACAntonio Clemente
Antonio Clemente
LDLaurent Dussopt
Laurent Dussopt
RSRonan Sauleau
Ronan Sauleau
PPPatrick Potier
Patrick Potier
PPPhilippe Pouliguen
Philippe Pouliguen
The design, realization, and experimental characterization of a 400-element electronically reconfigurable transmitarray operating in the Ka-band is presented. It is based on linearly polarized unit-cells with 180° phase-shifting capability. Several sequential rotation schemes have been compared numerically to generate a circularly polarized beam over a broad frequency band, and a random distribution has been selected to mitigate spurious cross-polarized side-lobes when scanning the main beam. The 2-D electronic beam-steering capabilities of ±60° have been verified experimentally. The prototype, illuminated by a horn antenna as a focal source, exhibits a broadside gain of 20.8 dBi at 29.0 GHz and a 3-dB bandwidth of 14.6% with radiation efficiency of 58%. The axial ratio remains below 2 dB within this bandwidth. Next, a planar substrate integrated waveguide focal source array was designed in order to reduce the focal distance by about 50% and thereby significantly improve the antenna compactness, and similar radiation performance is demonstrated numerically and experimentally.

31 January 2011 in IEEE Transactions on Antennas and Propagation
Verified
Journal Article
Closed access
MEMauro Ettorre
Mauro Ettorre
RSRonan Sauleau
Ronan Sauleau
LCLaurent Le Coq
Laurent Le Coq
This work proposes a novel multi-beam leaky-wave pillbox antenna. The antenna system is based on three main parts: feeding part (integrated horns), quasi-optical system and radiating part. The radiating and input parts are placed in two different stacked substrates connected by an optimized quasi-optical system. In contrast to conventional pillbox antennas, the quasi-optical system is made by a pin-made integrated parabola and several coupling slots whose sizes and positions are used to efficiently transfer the energy coming from the input part to the radiating part. The latter consists of a printed leaky-wave antenna, namely an array of slots etched on the uppermost metal layer. Seven pin-made integrated horns are placed in the focal plane of the integrated parabola to radiate seven beams in the far field. Each part of the antenna structure can be optimized independently, thus facilitating and speeding up the complete antenna design. The antenna concept has been validated by measurements (around 24 GHz) showing a scanning capability over ±30° in azimuth and more than 20° in elevation thanks to the frequency scanning behavior of the leaky-wave radiating part. The proposed antenna is well suited to low-cost printed circuit board fabrication process, and its low profile and compactness make it a very promising solution for applications in the millimeter-wave range.

1 February 2011 in International Journal of Microwave and Wireless Technologies
Verified
Journal Article
Closed access
PDF file
Maxim ZhadobovMaxim Zhadobov
Maxim Zhadobov
NCNacer Chahat
Nacer Chahat
RSRonan Sauleau
Ronan Sauleau
CQCatherine Le Quement
Catherine Le Quement
YDYves Le Drean
Yves Le Drean
The biocompatibility of millimeter-wave devices and systems is an important issue due to the wide number of emerging body-centric wireless applications at millimeter waves. This review article provides the state of knowledge in this field and mainly focuses on recent results and advances related to the different aspects of millimeter-wave interactions with the human body. Electromagnetic, thermal, and biological aspects are considered and analyzed for exposures in the 30-100 GHz range with a particular emphasis on the 60-GHz band. Recently introduced dosimetric techniques and specific instrumentation for bioelectromagnetic laboratory studies are also presented. Finally, future trends are discussed.

1 March 2012 in IEEE Transactions on Antennas and Propagation
Verified
Journal Article
Closed access
ACAntonio Clemente
Antonio Clemente
LDLaurent Dussopt
Laurent Dussopt
RSRonan Sauleau
Ronan Sauleau
PPPatrick Potier
Patrick Potier
PPPhilippe Pouliguen
Philippe Pouliguen
An electronically reconfigurable unit cell with 1-bit phase quantization (0°/180°) is proposed for X-band linear polarization transmit arrays. It consists of two rectangular patch antennas loaded by U- and O-slots and connected by a metallized via-hole. The transmission phase is controlled using two p-i-n diode switches integrated in the O-slot. An equivalent lumped-element circuit model is implemented and compared successfully to full-wave simulations. The numerical results are validated experimentally using an ad-hoc waveguide simulator. The prototype exhibits low insertion loss (1.8 dB) with the same level for both phase states, a broad 3-dB transmission bandwidth (14.7%), a 1-dB compression point of 13-15 dBm, and a gain of 5 dBi at 9.75 GHz. The performance and simplicity of the proposed unit cell make it attractive to build electronically steerable transmit arrays in X-band.

28 January 2011 in IEEE Transactions on Antennas and Propagation
Verified
Journal Article
Closed access
NCNacer Chahat
Nacer Chahat
MZMaxim Zhadobov
Maxim Zhadobov
RSRonan Sauleau
Ronan Sauleau
KIKoichi Ito
Koichi Ito
A new compact planar ultrawideband (UWB) antenna designed for on-body communications is presented. The antenna is characterized in free space, on a homogeneous phantom modeling a human arm, and on a realistic high-resolution whole-body voxel model. In all configurations it demonstrates very satisfactory features for on-body propagation. The results are presented in terms of return loss, radiation pattern, efficiency, and E-field distribution. The antenna shows very good performance within the 3-11.2 GHz range, and therefore it might be used successfully for the 3.1-10.6 GHz IR-UWB systems. The simulation results for the return loss and radiation patterns are in good agreement with measurements. Finally, a time-domain analysis over the whole-body voxel model is performed for impulse radio applications, and transmission scenarios with several antennas placed on the body are analyzed and compared.