This work focused on estimating the rate constants for three ozone-based processes applied in the degradation of diclofenac. The ozonation (Oz) and its intensification with catalysis (COz) and photocatalysis (PCOz) were studied. Three mathematical models were evaluated with a genetic algorithm (GA) to find the optimal values for the kinetics constants. The Theil inequality coefficient (TIC) worked as a criterion to assess the models’ deviation. The diclofenac consumption followed a slow kinetic regime according to the Hatta number (). However, it strongly contrasted with earlier studies. The obtained values for the volumetric rate of photon absorption (VRPA) corresponding to the PCOz process ( & ) were significantly distant from the maximum (). The computed profiles of chemical species proved that no significant amount of hydroxyl radicals was produced in the Oz, whereas the PCOz achieved the highest production rate. According to this, titanium dioxide significantly contributed to ozone decomposition, especially at low ozone doses. Although the models’ prediction described a good agreement with the experimental data (), the optimization algorithm was likely to have masked the rate constants as they had highly deviated from already reported values.
Mathematical analysis and simulation of a discontinuous rectification column was performed using an operational strategy during the start-up before reaching a pseudo-stable state in discontinuous operation. The mathematical model was formulated focusing on the equilibrium state (ES) and implementing MESH equations (M: Mass balance, E: Equilibrium thermodynamics, S: Stoichiometry relations, H: Enthalpy or heat balance) to provide solutions using the Thomas method and the Wang-Henke algorithms internally coupled to the Fourth Order Runge-Kutta method. The results were validated with experimental data from a distillation column at a pilot scale using an ethanol-water system with an equilibrium behavior described by the UNIQUAC Functional-group Activity Coefficients (UNIFAC) and Predictive Soave-Redlich-Kwong (PSRK) thermodynamic models with a global error of 1.84%. The molar ethanol concentrations presented deviations from the mathematical model predictions from 1.51% to 0.02%, with a global mean error of 0.48%. A mean error of 0.055% was obtained for the temperature profile of the column, thus demonstrating the effectiveness of the solution and its convergence capacity. The solution based on the Thomas method and the Wang-Henke algorithms coupled to the Runge-Kutta method made it possible to describe the behavior and variables of all stages of the distillation column. Operation at total reflux from start-up avoids wasting product and allows for the stabilization of the state variables, such as temperature and molar composition.