22 April 2022 in Journal of Cleaner Production
9 February 2022 in Transportation Research Record: Journal of the Transportation Research Board
The objective of this study was to compare the chemical and rheological properties of asphalt binders recovered from aged asphalt mixtures with the corresponding aged asphalt binders used in those mixtures. Seven plant-produced asphalt mixtures, with unmodified and polymer modified asphalt binders and varying reclaimed asphalt pavement (RAP) content, were compacted and aged in a conventional oven at 85°C for zero (unaged), five, or 10 days. Asphalt binders were extracted and recovered from each aging level for chemical and rheological characterization. Seven blends of virgin asphalt binder and RAP binder were constituted to be similar to those used in the seven plant-produced asphalt mixtures. Subsequently, each asphalt binder blend was aged by rolling thin film oven (RTFO) and pressure aging vessel (PAV) for chemical and rheological characterization. Chemical and rheological characterization included Fourier transform infrared spectroscopy, high and intermediate temperature performance grade (PG), frequency sweep, and linear amplitude sweep (LAS) tests. Asphalt mixtures aged for five and 10 days resulted in asphalt binders that were less aged than similar ones aged by PAV when measured by LAS fatigue parameter ALAS, frequency sweep Glover Rowe (G-R) parameter, and intermediate temperature PG. However, unaged asphalt mixtures yielded asphalt binders with similar properties to those aged in RTFO as measured by high temperature PG. Correlation analysis between asphalt binder and asphalt mixture aging revealed that the G-R parameter has the highest coefficient of correlation among parameters. Further, new aging indices were introduced to capture the effect of polymer modification on aging susceptibility.
30 August 2021 in Transportation Research Record: Journal of the Transportation Research Board
Growing use of recycled asphalt materials in asphalt pavement means the current volumetric-based Superpave mixture design may not address durability concerns arising from replacement of a proportion of virgin binder with recycled ones. To address this limitation, performance-based testing is introduced to supplement conventional volumetric mixture design in assessing cracking performance of asphalt mixtures. Louisiana Department of Transportation and Development’s Specifications for Roads and Bridges specify a criterion for the critical strain energy release rate, Jc, obtained from semi-circular bend (SCB) test as a complement of current practice to evaluate cracking resistance of asphalt mixtures. Quality control/assurance practices, however, require SCB samples to be long-term aged for five days at 85°C, which is a time-consuming process. Therefore, it is beneficial to be able to estimate SCB Jc for long-term aged asphalt mixtures based on SCB Jc measured from plant-produced asphalt mixtures. Asphalt mixture aging is complex, and various variables are involved in the aging process, including volumetric properties of asphalt mixture and chemical/rheological characteristics of asphalt binder. With the capability of artificial neural network (ANN) to address complex relationships between input and output variables, this study aims to predict the fracture parameter, SCB Jc, of asphalt mixtures using ANN. A total of 34 asphalt mixtures were selected for this study. SCB fracture test and asphalt binder tests for chemical and rheological characterization were conducted. Stepwise regression analysis was used to determine the significant parameters in the correlation with SCB Jc. With determined significant parameters, ANN using the gradient descent backpropagation approach was then applied to develop and validate the predictive model. It was shown that the developed ANN model was able to predict the fracture parameter, SCB Jc, of asphalt mixtures more accurately than linear and non-linear regression models.