Detection and interpretation of fault systems and stratigraphic features and the relationship between them are crucial for seismic interpretation and reservoir characterization. To provide better interpretation insight and to be able to extract overlooked features out of seismic data volumes, we have developed a new attribute that detects faults and other discontinuities while handling local nonstationary variations across them. First, we used predictive painting to form a structural prediction of seismic events from neighboring traces (left and right neighboring traces in 2D and neighboring traces in all directions around a reference trace in 3D) according to the local structural slopes. Then, we computed prediction residuals by subtracting each prediction from the original data, and we found the smallest prediction-error interval for each point that best represented discontinuity information at that point. The extracted fault information changed with location (spatially and temporally), and it was nonstationary. Conventional coherence measures operate on a spatial window of neighboring traces and a temporal (vertical) analysis window of samples above and below the analysis point, and they can hardly cope with nonstationarity in fault information. In contrast, in our method, neither temporal nor spatial windows were involved in coherence computation, which allowed us to honor nonstationary changes of fault information and to achieve high resolution in the vertical and lateral directions. To assess the performance of the proposed attribute, we compared it with the conventional coherence attribute over the same data set. The comparison demonstrated the effectiveness of discontinuity detection using predictive coherence and showed its value in extracting additional information from seismic data.
Mass-transport complexes (MTCs) are important stratigraphic elements in many deepwater basins. In hydrocarbon exploration, MTCs have traditionally been identified as seals although they can also act as migration pathways or cannibalize and compartmentalize adjacent reservoirs. Although the ever-improving resolution of seismic data has enhanced the knowledge about these deposits (e.g., geometry, distribution), at present the potential of MTCs to act as top and/or lateral seals is difficult to predict predrilling and few case studies are publicly available. The key objective here is to present examples of seismically resolvable characteristics of two MTCs in the Jubilee gas field, offshore Gulf of Mexico: one of the MTCs cannibalized part of the reservoir, and the other acted as the top seal. The Jubilee field is an area where the ability of MTCs to act as a top seal has been proven — the field produced approximately 205 billion cubic feet of natural gas until abandonment in 2016. When evaluating the sealing potential of MTCs, seismic interpretation can offer a powerful technique to identify indicators of hydrocarbon leakage. Additionally, mass flows that form MTCs can be highly erosive and cannibalize underlying reservoir deposits, which increase reservoir heterogeneity that can lead to compartmentalization. Our results indicate that the seal MTC in the Jubilee field is a detached MTC and that the translational morphodomain overlies the gas accumulation. Consequently, when predicting the seal potential of MTCs from seismic data, it is important to determine (1) the type of MTC (i.e., attached versus detached), (2) the specific MTC morphodomain overlying the hydrocarbon accumulation/prospect (i.e., the headwall, translational, or toe morphodomains), and (3) the presence of seismic indicators of fluid migration pathways (e.g., gas chimneys, pockmarks, etc.). These results shed some light on the present challenges of predicting the seal potential of MTCs in frontier basins around the world.
The study of mudstones is becoming increasingly significant in both conventional and unconventional hydrocarbon exploration. Starting at the microscale, we discuss the chemical and physical properties of mudstones and how they alter with burial and diagenesis. Moving to the macroscale, we address interpretation risks from seismic reflection data in ‘shale’; tectonic terrains (see Terminology section below). We focus on deeply buried mudstones that experienced temperatures in excess of 50 to 80°C (122 to 176°F). In these deeply buried settings, large-scale ductile deformation is commonly invoked. Above 80°C(176°F), chemical burial compaction processes reduce the ability of a mudstone to deform in a ductile manner, even under overpressure conditions. At temperatures above 80°C(176°F), we envisage ‘shale tectonics’ as mostly a brittle process; thus, deeply sourced ‘shale diapirs’ are highly unlikely, as is lateral flowage of ‘shale’ along deep ‘shale’ detachments. At the seismic scale, interpretation of ‘mobilized shale’ at depth is inherently controlled by the geophysical quality or limits of the seismic reflection data. One must consider the survey design and acquisition parameters, migration and velocity issues, and data vintage. Recent advances in seismic technology lead to the conclusion that the actual mobility of deeply buried mudstone features has been overinterpreted in several classic ‘mobile shale’ basins. Deeply buried mudstones most likely deform by a brittle process, with ductile deformation being highly improbable. When working in a ‘shale’ tectonic province, workers need to consider (1) mudstone composition and its burial history; (2) chemical compaction and diagenesis; (3) depth, temperature, and timing of the invoked mobilization; and (4) geophysical risks.
Underground coal fires (UCFs) pose a persistent environmental and economic threat to both the built and natural worlds. In Colorado, 38 known coal fires are currently monitored by the Colorado Division of Reclamation, Mining, and Safety, many of which are in the immediate vicinity of communities and transportation infrastructure. The Axial underground coal mine fire in northwestern Colorado has been active for over 70 years and has a documented history of surface impacts, including wildfire ignition and UCF-induced slope instability near a major highway corridor. Subsurface investigations indicate active combustion in multiple coal seams, contributing to complex and evolving surface deformation. Unmanned Aerial System (UAS)-based optical surveys acquired between 2018 and 2025 were used to assess terrain changes and slope instability at the Axial site. Structure-from-motion photogrammetry was used to generate three-dimensional point clouds and orthomosaics, and surface deformation was quantified using the Multiscale Model-to-Model Cloud Comparison (M3C2) algorithm. Orthomosaic products were additionally evaluated to characterize the development of geomorphic features and cross-validate the interpretation of M3C2-derived deformation patterns. Repeat UAS surveys effectively identified changes in unstable and hazardous terrain caused by UCFs. Results reveal progressive subsidence, fracture development, and localized slope instability associated with ongoing subsurface combustion. The findings provide critical information for risk mitigation and illustrate both the capabilities and challenges of using UAS photogrammetry for long-term monitoring of geohazards associated with legacy coal mine fires. The study further emphasizes the importance of georeferencing strategies, including ground control points and real-time kinematic positioning, to ensure consistent and reliable multi-temporal change detection.
We have used high-resolution geophysical data to investigate depositional and erosional bedforms in two geomorphologic provinces of the deepwater central Gulf of Mexico Basin: (1) the Mad Dog and Atlantis areas in the Sigsbee Escarpment region and (2) the Holstein minibasin within the salt canopy in the slope. Multibeam bathymetry indicates that the seafloor relief in the study areas is highly irregular because it is influenced by the dynamic behavior of underlying salt bodies resulting in the development of diverse bathymetric features. Side-scan images reveal erosional furrows of different morphologies at the base of the Sigsbee Escarpment that are oriented subparallel to the escarpment. Wide and sinuous furrows overlie mass transport deposits (MTDs), whereas, in other areas along strike, narrow rectilinear furrows are found beneath MTDs. The furrow fields in the Sigsbee Escarpment are located within a large series of erosional features that are linked to the action of westward flowing bottom currents associated with topographic Rossby waves that manage to rework sediments at water depths up to 2000 m. The interaction between the bottom current flow and the seafloor is likely influenced by the MTD’s irregular top surface relief and lateral changes in the escarpment’s morphology resulting in the development of complex sinuous furrow morphologies. North of the escarpment, subbottom profiles indicate a series of buried sediment waves found in the southern rim of the Holstein minibasin. Sediment wave morphometry indicates wavelengths ranging from 116 to 339 m and wave heights between approximately 0.8 and 2.4 m. Sediment waves were likely formed by turbidity currents as they exited the minibasin. The vertical change in topographic relief from the minibasin to the salt high led to variations in flow thickness and flow velocity of turbidity currents passing over the minibasin’s open rim. Consequently, these changes in flow regime led to the formation of sediment waves.