17 November 2024 in Nuclear Instruments and Methods in Physics Research Section A: Accelerators, Spectrometers, Detectors and Associated Equipment
12 July 2024 in IEEE Transactions on Nuclear Science
The impurity from raw material in the as-grown crystal is one of the most important factors that hamper the advancement of Cd 0.9 Zn 0.1 Te detectors. However, the influence of impurity oxygen is rarely reported. In this study, first principle-calculation is carried out to give a prediction about transition levels of oxygen-related defects. Glow Discharge Mass Spectrometry (GDMS) is used to determine the concentration of all the elements. The quantitative analysis of oxygen related defects is carried out by I-DLTS (deep level transient spectrum), which can break through the limitations of traditional C-DLTS testing in the field of high resistance materials. The peaks observed at about 50K and 100K are related to the level of (V Cd -O Te ) 0/- and (V Cd -O Te ) -/2- defect pair, with energy about Ev+0.079 eV and EV+0.173 eV, trap cross-section about 3.02×10 -19 and 1.01×10 -19 cm 2 , respectively. The effect of oxygen on (μτ) e of the Cd 0.9 Zn 0.1 Te semiconductors is evaluated through Alpha particle spectrum response testing by fitting the charge collection efficiency with applied bias voltages. The (μτ) e is about 5.21×10 -4 cm 2 /V in CZT with more oxygen and 2.33×10 -3 cm 2 /V with less oxygen. The mobility is obtained from the results of Time of Flight (TOF) testing through the laser-beam-induced current (LBIC) technique, to be around 1000 cm 2 /V·s -1 for both samples, and the lifetime to be 494 ns and 2407 ns respectively. It can be concluded that oxygen-related defects can terribly affect the electron transport properties.