Over the next decade, the extremely brilliant fourth generation synchrotron radiation sources are set to become a key driving force in materials characterization and technology development. In this study, we present a conceptual design of a versatile “Materia” diffraction and imaging beamline for a low-emittance synchrotron radiation facility. The beamline was optimized for operation with three main principal delivery regimes: parallel collimated beam ∼1 mm beam size, micro-focus regime with ∼10 μm beam spot size on the sample, and nano-focus regime with <100 nm focus. All regimes will operate in the photon energy range of 10–30 keV with the key feature of the beamline being fast switching between them, as well as between the various realizations of diffraction and imaging operation modes while maintaining the target beam position at the sample, and with both spectrally narrow and spectrally broad beams up to the energy band ΔE/E of 5 × 10−2. The manuscript presents the details of the principal characteristics selected for the insertion device and beamline optics, the materials characterization techniques, including the simulations of thermal load impact on the critical beamline optics components. Significant efforts were made to design the monochromators to mitigate the very high beam power load produced by a superconducting undulator source. The manuscript will be of interest to research groups involved in the design of new synchrotron beamlines.
27 December 2022 in Proceedings of the Russian higher school Academy of sciences
The wetting dynamics of modified capillary-porous surfaces made of aluminum and titanium was experimentally studied at free-convective heat exchange with the environment. The influence of the concentration of ethyl alcohol and its initial temperature on the wetting front velocity has been established. The volume concentration of alcohol in the mixture varied from 0 to 95.5 %. The characteristic modes of changes in the height of the liquid rise over capillary-porous surfaces over time have been expressed in the form of power dependences.
27 December 2022 in Proceedings of the Russian higher school Academy of sciences
In this paper, a comparative analysis of schemes of heat and mass transfer devices of indirect evaporation type is carried out. These devices are a family of plane-parallel channels, in one of which the evaporation of water film takes place. Mathematical modeling of heat and mass transfer devices is based on solving a system of differential equations that represent the heat balance equations for each of the channels. Numerical studies are carried out in a wide range of input parameters: temperature from 15 to 50 °С, relative air humidity from 20 to 100 %, and Reynolds number 50…1500. The calculations are carried out at atmospheric.
30 May 2025 in Bulletin of the Tomsk Polytechnic University Geo Assets Engineering
Synchrotron radiation facility «SKIF» with an ultra-low electron beam emittance opens up broad prospects for the use of undulator radiation in geological and geochemical studies. The increase in the radiation brightness allows one to implement coherent (phase-sensitive) high-resolution microscopy methods, including ptychography and ptychotomography. It becomes possible to study the fine structure of micro-objects (inclusions, mineral grains, etc.) with nanometer-scale spatial resolution, which allows for reconstruction of the complex geological histories of minerals associated with the formation of various rocks. Two- and three-dimensional traditional and confocal X-ray fluorescence micromapping provides complementary information on the chemical composition of minerals and inclusions, and allows one to identify the individual phases. The combination of confocal fluorescence microscopy and XANES microspectroscopy will provide additional information on the local structure and valence of elements at the study point, solving the problem of express restoration of the mineral composition of ores and sediments. In addition, in situ methods of single-crystal microdiffraction in diamond anvils are becoming available, which are relevant for studying high-pressure phase transitions and reactions, including deep ore formation processes. The paper describes an updated project of the 1-1 "Microfocus" undulator-based beamline of SRF «SKIF», including a set of implemented experimental methods, a coordinated X-ray optical layout, operational modes, experimental scenarios and expected parameters of radiation beams at the sample. The authors substantiated optical and thermal-mechanical solutions, estimated achievable spatial resolutions. The paper demonstrates feasibility of combining "coherent" and "traditional" methods in the hard X-ray range, i. e. "multimodality" of the beamline.