9 September 2021 in Textile Research Journal
Flexible wearable strain sensors with excellent sensing performance have received widespread interest due to their superior application capability in the field of human-computer interaction, sports rehabilitation, and disease diagnosis. But at present, it is still a considerable challenge to exploit a flexible strain sensor with high sensitivity and wide sensing range that is easily manufactured, low-cost, and easily integrable into clothing. MXene is a promising material sensitive enough for flexible sensors due to its superior conductivity and hydrophilicity. The warp knitting weft insertion textile structure gives the fabric excellent elasticity, making it suitable as a flexible, stretchable substrate. Therefore, utilizing a polyester elastic fabric with a warp knitting weft insertion structure, a fabric strain sensor with high sensitivity and wide sensing range prepared by layer-by-layer self-assembly of polyvinyl alcohol layers and MXene layers is reported in this study. The strain sensor exhibits high sensitivity (up to 288.43), a wide sensing range (up to 50%), fast response time (50 ms), ultra-low detection limit (a strain of 0.067%), excellent cycle stability (1000 cycles), and good washability. Besides, affixing the MXene/polyvinyl alcohol/polyester elastic fabric strain sensor on the joints can detect the movement of limbs. Therefore, the MXene/polyvinyl alcohol/polyester elastic fabric strain sensor demonstrates potential application opportunities in smart wearable electronic devices, and the researcher can also apply this method in the production of other flexible, intelligent wearable devices.
16 January 2022 in Textile Research Journal
Highly conductive, flexible, stretchable and lightweight electrode substrates are essential to meet the future demand on supercapacitors for wearable electronics. However, it is difficult to achieve the above characteristics simultaneously. In this study, ultrafine stainless-steel fibers (with a diameter of ≈30 μm) are knitted into stainless-steel meshes (SSMs) with a diamond structure for the fabrication of textile stretchable electrodes and current collectors. The electrodes are fabricated by utilizing an electrodeposited three-dimensional network graphene framework and poly(3,4-ethylenedioxythiophene) (PEDOT) coating on the SSM substrates via a two-step electrodeposition process, which show a specific capacitance of 77.09 F g−1 (0.14 A g−1) and superb cycling stability (91% capacitance retention after 5000 cycles). Furthermore, the assembled flexible stretchable supercapacitor based on the PEDOT/reduced graphene oxide (RGO)@SSM electrodes exhibits an areal capacitance (53 mF cm−2 at 0.1 mA cm−2), a good cycling stability (≈73% capacitance retention after 5000 cycles), rate capability (36 mF cm−2 at 5 mA cm−2), stretchable stability (≈78% capacitance retention at 10% strain for 500 stretching cycles) and outstanding flexibility and stability under various bending deformations. The assembled supercapacitors can illuminate a thermometer and a light-emitting diode, demonstrating their potential application as stretchable supercapacitors. This simple and low-cost method developed for fabricating lightweight, stretchable and stable high-performance supercapacitors offers new opportunities for future stretchable electronic devices.
5 January 2021 in Textile Research Journal
One-dimensional high-performance yarns with excellent conductivity and flexibility are of considerable interest in the energy and aerospace industries. However, how to achieve highly conductivity, excellent flexibility, extreme condition durability and high mechanical performance in one fiber material is still a great challenge using economically viable materials and synthesis technologies. Herein, we report electrically conductive yarns (modified polyimide (M-PI)/reduced graphene oxide (RGO) yarns) consisting of RGO coated on the surface of nitrogen plasma M-PI yarns, which are fabricated by combining the N2 plasma pre-treatment and repeated dip-coating and reducing technique. N2 plasma treatment is used to roughen the surface of the PI yarn and introduce functional groups, contributing to improve wettability, which can provide a stronger adhesion of the graphene coating. The dip-coating and reducing process was repeated 10 times to enhance the loading mass of RGO on the PI yarns, then M-PI/RGO yarns with better conductivity property can be obtained. The effects of N2 plasma treatment power and time on the M-PI yarns and M-PI/RGO yarns are investigated and discussed. The results demonstrate that the graphene layer is uniformly and densely coated on the PI yarn when being treated at 200 W for 8 min, and the conductivity of the M-PI/RGO yarn reaches 1.51 × 102 S/m. The M-PI/RGO yarn combine the advantages of RGO and PI yarns, retaining the mechanical properties and thermal stability of PI yarn while exploiting the conductive property of RGO. In addition, the enhanced adhesion between the PI yarn and graphene coating endows the composite yarns with excellent fastness and superior flexibility. This work describes an environmentally friendly, controllable and facile method to develop flexible and conductive functional graphene-coated PI yarns with high-performance properties.