1 September 2017 in IOP Conference Series: Materials Science and Engineering
The design process of short-term and long-term loading of prestressed I-beams made of ultra-high performance concrete (UHPC) and the overall research results are presented in this article. The prestressed I-beams are intended and designed to replace steel HEB beams mainly in the construction of railway bridges with fully concreted height of the beams. These types of structures have the advantage of a low construction height. The prestressed I-beams were made of UHPC with dispersed steel fibres and are reinforced by prestressing cables in the bottom flange. Two specimens of 9 m span, three specimens of 7 m span and two specimens of 12 m span were made for the short-term loading. For the purpose of the long-term loading, two specimens of 12 m span were made and subsequently loaded for 450 days. All specimens were tested in four-point bending tests in the laboratory. The article presents also comparison of results of the experiments with computer simulations.
1 September 2017 in IOP Conference Series: Materials Science and Engineering
UHPC has a number of unique properties, which stands over conventional concrete. The demand for these high performance properties predetermines some elements as typical representatives for the use of UHPC. For this reason, the range of use of UHPC elements is very wide. This article deals with the numerical design and assessment of the three variants of UHPC slabs forming permanent formwork of reinforced concrete bridge deck of the footbridge. Utilisation of outstanding properties of UHPC in this special case would enables unique and easier way of construction of this bridge.
24 May 2017 in MATEC Web of Conferences
MATEC Web of Conferences, open access proceedings in Materials science, Engineering and Chemistry
1 September 2017 in IOP Conference Series: Materials Science and Engineering
This paper presents design of footbridge with double curvature made of UHPC. The structure is designed as a single-span bridge. The span of the bridge is 10.00 m, and the width of the deck is 1.50 m. The thickness of shell structure is 0.03 m for walls and 0.045 m for deck. The main structure of the bridge is one arch shell structure with sidewalls made of UHPC with dispersed steel fibers with conventional reinforcement only at anchoring areas. The structure was designed on the basis of the numerical model. Model was subsequently clarified on the basis of the first test elements. Paper presents detailed course on design of the bridge and presentation will contain also installation in landscape and results of static and dynamic loading tests.
24 May 2017 in MATEC Web of Conferences
MATEC Web of Conferences, open access proceedings in Materials science, Engineering and Chemistry
21 September 2026 in Proceedings of the Institution of Civil Engineers - Engineering History and Heritage
The paper describes a detailed survey of a historic stone bridge structure over the Vltava River in Prague, which includes a restoration proposal using the modern composite matenorial ultra-high performance fibre-reinforced concrete. The bridge is an essential part of the cultural heritage of the city of Prague and has a total length of 229 m, consisting of eight spans. It was severely damaged by bombing at the end of World War II and was repaired several years later. The reconstruction included widening the bridge deck by adding concrete cantilevers. These are now at the end of their useful life and a new solution needs to be found for this historic bridge structure.