21 October 2017 in Journal of Geophysical Research: Earth Surface
13 October 2020 in Water Resources Research
Stream hydromorphology regulates in‐stream water flow and interstitial flow of water within streambed sediments, the latter known as hyporheic exchange. Whereas hyporheic flow has been studied in sand‐bedded streams with ripples and dunes and in gravel‐bedded streams with pool‐riffle morphology, little is known about its characteristics in plane bed morphology with subdued streambed undulations and sparse macroroughness elements such as boulders and cobbles. Here, we present a proof‐of‐concept investigation on the role of boulder‐induced morphological changes on hyporheic flows based on coupling large‐scale flume sediment transport experiments with computational fluid dynamics. Our results show that placement of boulders on plane beds increase the reach‐scale hyporheic median residence time, τ50, by 15% and downwelling flux, qd, by 18% from the plane bed. However, reach‐scale hyporheic exchange changes are stronger with τ50 decreasing by 20% and qd increasing by 79% once the streambed morphology reached equilibrium (with the imposed upstream sediment and flow inputs on boulders). These results suggest that hyporheic flow is sensitive to the geomorphic response from bed topography and sediment transport in gravel‐bedded streams, a process that has been overlooked in previous work.
17 November 2017 in Water Resources Research
23 April 2023 in Journal of Ecohydraulics
High resolution topographic data are necessary to understand benthic habitat, quantify processes at the water-sediment interface, and support computational fluid dynamics models for both surface and hyporheic hydraulics. In riverine systems, these data are typically collected using traditional surveying methods (total station, DGPS, etc.), airborne or terrestrial laser scanning, and photogrammetry. Recently, handheld surveying equipment has been rapidly acquiring popularity in part due to its processing capacity, price, size, and versatility. One such device is the iPhone LiDAR, which could have a good balance between precision and ease of use and is a potential replacement for conventional measuring tools. Here, we evaluated the accuracy of the LiDAR sensor and a Structure from Motion (SfM) method based on photos collected using the iPhone Cameras. We compared the LiDAR and SfM elevations to those from a high-precision laser scanner for an experimental rough water-worked gravel-bed channel with boulder-like structures. We observed that both the LiDAR and SfM methods captured the overall streambed morphology and detected large (Hs ≥ 15 cm) and macro (5 cm ≤ Hs < 15 cm) scales of topographic variations (Hs, roughness). The SfM technique also captured small scale (Hs <5cm) roughness whereas the LiDAR consistently simplified it with errors of ∼3.7 mm.
29 September 2020 in Earth Surface Dynamics
Bed load transport formulations for gravel-bed rivers are often based on reach-averaged shear stress values. However, the complexity of the flow field in these systems results in wide distributions of shear stress, whose effects on bed load transport are not well captured by the frequently used equations, leading to inaccurate estimates of sediment transport. Here, we modified a subsurface-based bed load transport equation to include the complete distributions of shear stress generated by a given flow within a reach. The equation was calibrated and verified using bed load data measured at Oak Creek, OR. The spatially variable flow field characterization was obtained using a two-dimensional flow model calibrated over a wide range of flows between 0.1 and 1.0 of bankfull discharge. The shape of the distributions of shear stress was remarkably similar across different discharge levels, which allowed it to be parameterized in terms of discharge using a gamma function. When discharge is high enough to mobilize the pavement layer (1.0 m3 s−1 in Oak Creek), the proposed transport equation had a similar performance to the original formulation based on reach-averaged shear stress values. In addition, the proposed equation predicts bed load transport rates for lower flows when the pavement layer is still present because it accounts for bed load transport occurring in a small fraction of the channel bed that experiences high values of shear stress. This is an improvement over the original equation, which fails to estimate this bed load flux by relying solely on reach-average shear stress values.
13 March 2025 in Advances in Water Resources